60w solar LED street lighting system /solar panel 200w /controller 12/24v/ pole 8m /battery150ah

Name

Specification

Quantity

Parameter

Solar panel

120W/12V

1 piece

• Polycrystalline, 156x156mm,36 piece.
• Size:1490x670x35 with 90cm wires,MC4 Connector. and   Weight:12KG
• Warranty: More than 90% output power in 10 years .and more than 80% output power in 25 years.
• The product have passed TUV, IEC, MCS etc certificate.

Light source

LED30W/12V

1 piece

• Single Integrated Power LED(30W),Woking Voltage DC12V,General luminous:3000lm,LED Luminous Efficiency:100lm/W,Center illuminance:14lx,Ra>80,Color temperature:2700-7000,Protection Grade :IP65,Working life >50000, It can woke more than 10 years in accordance with 12 hours a day.
• Lamp shade is Die-casting molded with aluminum alloy,and its face is UV-resistant and corrosion resistant .
• No bad glare; No Strobe; Start without delay .Low maintenance cost .
• Production Size :718x350x180mm ,Weight :6.56KG

Controller

10A

1 piece

• PHOCOS CIS Series,12V/24VAutomatic identification , light control and time control,Protection Grade IP68

Battery

12V/120AH

1 piece

• Gel Battery that dedicated to solar energy. It can use recurrent more than 400 times in 100% discharge cases For the solar energy street lamp that in simple circulatory system. And  its  advantage is that :the small self -discharge rate ,the better deep discharge, Top charge acceptance, large capacity,strong start in low ,the good shock resistant and Anti-temperature charge Production 
  • Size: 483x170x240mm,Weight :44.5KG
    • Packing Size :506x193x290mm,Weight :46.4KG 
      • The two Battery is used in series in this collocation

Pole and other steel fitting

6M

Set

• Best steel Q235 or Q345;hot dip galvanized and paint coated .
  • iron plate is rolled into type for one time .
    • Flange plate :350x350x20mm
      • Solar panel bracket  and  4# or 5# Angle iron,50x5mm and 100x100mm Flat iron. Square tube is assembled by bolt ,any section is made with mold. With high efficiency and precision , standardized parts can replace each other and the same time increase the packing quantity and reduce transport cost .
      • Battery body are welded after 2mm plate stamping molding 

Wires harness

--

1 piece

• With the special connector ,standardization,substitutability ,high installing efficiency,saving cost .
• Wire harness can be designed according to different lamp type .

others

Baseplate 20 steel rod ,standard component and so on

Conditions

Voltage of system: 12V,working time: 10 hours ,Best work temperature -20degree-50degree

Packing Quantity

40set/20FCL