industrial digital probe thermometer

K-Type industrial digital probe thermometer 

Model: DT1311

This is a professional digital Thermometer with K-Type Thermocouples for high temperature measurements. You can replace the thermocouples with any standard K-Type thermocouple connectors.

The thermometer has advanced features with 4 digits LCD Display and able to display Higher Temperature Range (up to 1370 °C / 2498 °F), Higher Accuracy.

you are able to fine tune the temperature by using Self-Calibration Function.

It has a wide range of applications in Ovens, Furnaces, Ceramics, Pottery, Molten Metal and many other industrial uses.

Feature:

• 4 digits Large LCD display
• Celsius and Fahrenheit selectable
• Low battery indication
• Data Hold function mode
• Auto power-off

Main Technical specifications:

Temperature range: -200 ~ 1370 °C (-328 ~ 2498 °F)

Accuracy: ±(1%+1°C ); ±(1%+2°F )

Resolution:0.1 °C & 0.1 °F

Type of temperature measuring:K

Sampling rate:2.5times per second

Operating Temperature: 0 ~ 40 °C (32 ~ 104 °F)

Operating Humidity: 0 ~ 70 % (R.H.)

Input protection: 60V DC or 24V AC maximum input voltage on any combination input pins

Input connector: accept standard miniature thermocouple connectors

Notice

The thermometer itself can sensor 1370°C,but the 2 test probes can only test the temperature up to -50 TO 204°C,so if you need to test more than 204°C,please change these two probes

The calibration operation

1.Normal temperature calibration : Install the batteries while press down the power key , the thermometer displays --- , and then displays a temperature reading , adjust this reading to 25°, press the power key again to confirm the calibration

2.High Temperature calibration : After the thermometer been calibrated for the normal temperature , connect it to the calibrator , adjust the calibrator to 50mV voltage output , and adjust the reading on the thermometer to 1235°, press the power key to confirm the calibration .

Only professionals are suggested to do the calibration work. Incorrect operation can reduce the accuracy of the thermometer