Electric 16mm coil heater Spring Heater Hot Runner Coil Heater for injection mold machine

Name of product

Hot runner heater

Inner Diameter of coiled heater

8-38mm( + 0.05mm)

Coil style Length

40-200mm  (+ 0.5mm)

staright style length

200-3000mm (+ 0.5mm)

Cross-section

Round Dia.3mm;3.3mm;3.5mm

Square: 3x3mm;3.3x3.3mm,4x4mm,

Rectangular:4.2x2.2mm,4x2mm;1.3x2.2mm

Tube Material

SUS304/SUS/310S/Incoloy800

Tube color

sliver or annealed black

Insulation

High pure Mgo

Inner heating element

NiCr8020

Voltage

12v;24v;110v;220v;240v;380v

Wattage

200-3000w( 6.5W/CM2 )   + 5% tolerance

Max. Temperature:

650°C

Built-in thermocouple 

with or without J /K TC(Available)

Delivery Time

3-5 days(10-500pcs)

7 days(more than 500pcs)

Name of product

Hot runner heater

Inner Diameter of coiled heater

8-38mm( + 0.05mm)

Coil style Length

40-200mm  (+ 0.5mm)

staright style length

200-3000mm (+ 0.5mm)

Cross-section

Round Dia.3mm;3.3mm;3.5mm

Square: 3x3mm;3.3x3.3mm,4x4mm,

Rectangular:4.2x2.2mm,4x2mm;1.3x2.2mm

Tube Material

SUS304/SUS/310S/Incoloy800

Tube color

sliver or annealed black

Insulation

High pure Mgo

Inner heating element

NiCr8020

Voltage

12v;24v;110v;220v;240v;380v

Wattage

200-3000w( 6.5W/CM2 )   + 5% tolerance

Max. Temperature:

650°C

3-5 days(10-500pcs)

7 days(more than 500pcs)

Name of product

Electric D-nail/Enail Heating unit

Inner Diameter of coiled heater

8/10/14/16/18/20mm  ( + 0.05mm)

Coil Height

13.3mm/12.7mm  ( + 0.05mm)

Flat Coil

ID9mm,OD26mm

ID10mm,OD27mm   ( + 0.05mm)

Voltage

12v;24v;120v;220v

Wattage

100w;120w;150w;250w

Cross-section 

3x3mm;2.2x4.2mm

Thermocouple

K or  J type

Connector plug

Xlr female and male 5 pin

Sleeve  material

kevlar/fiberglass(Fashional)

1. Inquiry-Professional quotation.

2. Confirm the price, lead time, artwork, payment term etc.

3. Topright sales send the Proforma Invoice with Topright seal.

4. Customer make the payment for deposit and send us Bank receipt.

5.Initial Production Stage-Inform the clients that we have got the payment,And will make the products according to your request,. After getting the sample or drawing approval, we inform that we will arrange the production & inform the estimated time.

6. If possible,middle Production-send photos to show the production line which you can see your products in . Confirm the estimated delivery time again.

7. End Production-Mass production products photos will send to you for approval. You can also arrange the third party Inspection .

8. Clients make payment for balance and Topright Ship the goods .Also can accept payment term-Balance against B/L Copy Or L/C payment Term which we discussed. Inform the tracking number and check the status for clients.