29448 Spherical roller bearing / thrust roller bearing

 Our Thrust Roller Bearings including below types:

    29200 / 29300 / 29400 / 81100 series

 Discription of Thrust Roller Bearings:

    Thrust Roller Bearing is used for axles of axial load and radial joint load, but the radial load shall not exceed 55% of axial load. Compared with other thrust roller bearings, this one has the advantages such as lower friction coefficient, higher speed and self-aligning properties.

    The rollers of thrust roller bearing are in the spherical shape, and the spherical raceway surface of the housing washer is selfaligned.

 Thrust Roller Bearings Features:

1): Able to accommodate misalignment 
2): Suitable for high axial and some radial loads 
3): Relatively high speed ratings 

4): Heavy machine tools, high power Marine gearbox, oil rig, vertical motor machinery, Juki hooks,

    vertical pumps, vertical centrifuge, jack, low speed reducer

Description of thrust spherical roller bearings:

 1.single row, self-aligning roller bearings

 2. They comprise solid shaft and housing washers and asymmetrical barrel rollers with cages.

 3. The cage holds the roller and cage assembly together with the shaft locating washer.

 4. The bearings can be dismantled. The parts of the bearings can be fitted separately.

 5. Spherical roller thrust bearings can support very high axial loads and permit relatively high speeds. Since the raceways are at an angle to the bearing axis, the bearings can also support radial loads.

Thrust spherical roller bearings designs:

Bearings are produced in several designs which is mainly different in cage as following:

Bearings in "M" design have brass cages guided by a steel sleeve on the shaft washer.

Bearings in "J" design have pressed steel cages guided on the shaft washer.

Bearings in "J" design are interchangable with bearings with machined brass cage. If the bearings with machined brass cage is to be replaced in arrangement, where the shaft washer rests on the shaft on the face of steel sleeve which guides the cage by the bearings in "J" design, it is necessay to insert a spacer between the shaft washer and original shaft shoulder.

Products Show Case:

  Our main products are: deep groove ball bearings, taper roller bearings, spherical roller bearings, self-aligning bearings, thrust ball bearings, pillow block bearings, cylindrical roller bearings, auto bearings and non-standard bearings.

    We have established partner relationship with companies from India,South Africa, Southeast Asia, Middle East and European countries.Your visit and cooperation will be warmly welcomed!

    Why choose us?

1,What about the MOQ?Can you accept sample order?

------Our company MOQ is 1pc,we can accept sample order.

2,Can you accept OEM?

------Yes,we can.Customizing according to your requirement or drawing.

3,Do you supply door to door service?

------By air or express(DHL,FEDEX,EMS etc.)

4,Could you tell me the materials of your bearings?

------ Chrome steel, carbon steel, and stainless steel, ceramic and plastic material.

5, Your company is a factory or trading company?

------ We have our own factory,also doing trade.