Environmental Protection Coconut Shell Sawdust Wood Carbonization Furnace

Specifications

Environmental protection coconut shell sawdust wood carbonization furnace
1.Self ignite type or airflow type
2.Short time

Environmental Protection Coconut Shell Sawdust Wood Carbonization Furnace

 

Wood carbonization furnace:

 

In our factory, there are two types of carbonization furnaces which are spontaneous carbonization furnace and airflow carbonization furnace with different appearance shape and different size for different capacity. We will provide you a suitable one according to your demands. 

 

Raw materials of wood carbonization furnace can be:

 

1. Tree branches whose diameter is more than 30mm.
2. Some nut shells, such coconut shell, walnut shell, etc.
3. Biomass briquettes made from sawdust, small agriculture wastes.

 

 

The final charcoal from wood carbonization furnace:

 

After biomass sticks or any other tree branches being carbonized by carbonization furnace into charcoal, the final charcoal is smokeless, smelless with higher calorific value which can be 8000-9000 Kcal (according to different kinds raw materials). And the charcoal's weight is one fourth of its origional weight.

 

 

 

 

 

1. Spontaneous/self ignite wood carbonization furnace:

 

Self ignite carbonization furnace is an environmental carbonization furnace, which is saving fuel during the whole carbonization process. Natural carbonization furnace uses thermal decompose goods in the carbonization furnace by its incomplete combustion.

 

Square self ignite furnace:

 

 

The working principle of self ignite wood carbonization furnace:

 

1. Drying stage: First, we should set fire on wood, tree branches, wood briquettes, etc.(which we have laid in the carbonization furnace) through four holes which locate furnace's bottom. Then close the holes. And close the upper holes till the thermometer (which loactes on the surface of thr furnace) reaches 100°C. At this stage, the temperature in the furnace will reach about 100-160°C,and all the water content will be evaporated.
2. Initial phase of carbonization: At this stage, the temperature in the furnace will reach 160-280°C, wood, tree branches, wood briquettes, etc. will be decomposed into carbon dioxide, carbon monoxide, etc.
3. Carbonization stage: At this stage, the temperature will reach 280-450°C, wood, tree branches, wood briquettes,etc. will be decomposed rapidly and finally carbonized into charcoal.
4. Carbonization time: 34 hours (Carbonize briquette in furnace about 14 hours,then cool them about 20 hours in carbonization furnace)

 

Round self ignite furnace:

 

The parameters of self ignite wood carbonization furnace:

 

Model	Loading Capacity	Power	Size	Weight
LTRSC-1	2500kg per batch	1.5kw	2*2*2.1m	3t
LTSSC-400	2500kg per batch	1.5kw	2.2*1.6*2m	3.2t
LTSSC-600	3700kg per batch	1.5kw	3*1.8*2m	4.5t
LTSSC-800	5000kg per batch	1.5kw	3.5*2*2.2m	6t

 

 

2. Airflow type wood carbonization furnace:

 

The airflow wood carbonization furnace is our new invent, which is also combined type. The charcoal can be hoisted outside, in this way the cooling time can be reduced much, thus, the productive efficiency increases a lot. It is the ideal choice for mass production of charcoal.
This type of furnace adopts the structure of unique air storage chamber, to fully reuse the smoke produced during the process of carbonization. And 60% of the redundant smoke can be used in drying and carbonizing, saving much fuel during the whole process, and increasing the enterprise revenue.

 

Square airflow type furnace:

 

 

The characteristics of airflow type wood carbonization furnace:

 

1. Continuous carbonization furnace;
2. Closed cooling device;
3. The carbonizing temperature can be controled and adjusted;
4. High heat transfering and high hard-wearing composite materials lead to high efficiency carbonization stove.
5. All the gas return furnace for combustion, so there is no exhaust emission.
6. Short carbonizing time.

7. No smoke nor no polution.

 

Round airflow type furnace:

 

 

The parameters of airflow type wood carbonization furnace:

 

Round type:

Model	Capacity	Carbonization Time	Size(m)	Weight(t)
LTRAC-300	650kg	4h	1.55*1.55*2.17	2.2
LTRAC-500	1250kg	6h	1.92*1.92*2.17	2.8
LTRAC-1000	2500kg	10h	2.2*2.2*2.22	3.7

 

Square type:

Model	Loading Capacity	Outlet Capacity	Dimension	Weight
LTSAC-600	1000kg	400kg	3.5x1.6x2.0m	2.5ton
LTSAC-800	2000kg	800kg	4.0x1.6x2.0m	4ton
LTSAC-1000	2500kg	1000kg	5.0x1.7x2.2m	5ton

 

 

Our Services:

 

1. Pre-sales service:
1). sales person, project manager, technology engineer, accountant staff.
2). pofessional responding team: would be very fastly and exactly to send you offer.
3). choose suitable machines and make producing plan according to the raw materials, final shapes and output capacity.
4). offer reasonbal price to meet your budget.
5). invite customers to our factory, demostrate the machines, let you know how the machine work, and compare the quality with other suppliers.
6). producing super and solid quality of machines.
7). arrange shipping and fastly delivery.
8). standard export package or as your requirements.
2. After-sales service:
1). assistance to build factory.
2). repairing and maintain if any problems occur in the warranty.
3). help for installation or clerk training, if necessary, dispatch technicians to your country to install the machines.
4). supply spare and wearing parts of our machines.
5). any feedback of our wood carbonization furnace can be told us, and we will try our best to support you.
6). technology knowlogy shares with you.
7). help for any other machine that we haven't.

 

Contact information:

 

If you are interested our any machines, please don't hesitate to contact me.