industrial rubber hoses

Specifications

1.Oil resistant synthetic rubber
2.Abrasion and weather resistant
4.ageing- resistance,
5.fatigue resistance

Specifications

1. HIGH PRESSURE

2. Oil resistant synthetic rubber

3. weather resistant synthetic rubber

4. Temperature range : -40 °C to +100 °C

5. high tensile

6. SBR with good wear resistant, anti-static

7. High strength textile cord or Steel wire braid

8. .Anti-impact and weather-proof

9. water conveyance at coal excavations

Features:

1. The hose has the double properties of bearing both the positive and negative pressures,can be used normally under the pressure of-80kpa(600mm mercury)at the vacuum.The hose can't become flat under pressure,and can't off from it's layer,and has good bending property the body is solid and is capable of adapting to working conditions

2. Oil Suction and Discharge Hose is designed for sucking and conveying most commercial gasoline,LP gas, crude oil, diesel fuels, and other petroleum products where heavy duty diameter hose is required. Suction and Discharge Service both are available. Max aromatic content 50%

Applications:

1. Abrasive blast applications such as cleaning , paint and finish removal, and preparation and finishing of metal , stone ,sand, and glass Construction

2. Handles sand , steel shot, and other highly abrasive materials.

Abrasive blast applications such as cleaning , paint and finish removal, and preparation and finishing of metal , stone ,sand, and glass Construction:

3. Oil Suction and Discharge Hose is designed for sucking and conveying most commercial gasoline,LP gas, crude oil, diesel fuels, and other petroleum products where heavy duty diameter hose is required.

 

Structure

ube : Synthetic rubber resisting the deteriorating effects of petroleum products, not discolor fluids.

Reinforcement : multiple high strength tire cords (or with round steel wire which helixed in rubber) with internal static copper wire

Cover : Oil and Abrasion and weather resistant synthetic rubber . Corrugated Cover

Hose end: With optional Metal flange joints or Cam lock couplings with hose clamps .

Specification:

Inside Diameter: 102mm----457mm

Length: Up to 20 meters

Working pressure: 0.7MPa----2.0MPa

Working Temperature: -30 °C to +90 °C

 

DN	Hose I.D		Wire O.D	Hose O.D	Working Pressure		Burst Pressure		Minimum Bend Radius	Weight	Length
	inch	mm	mm	mm	MPa	psi	MPa	psi	mm	kg/m	metres
6	1/4	6.4	11.1	15.9	22.5	3270	90.0	12840	100	0.31	50/100
8	5/16	7.9	12.7	17.5	21.5	3120	85.0	12280	114	0.38	50/100
10	3/8	9.5	15.1	19.8	18.0	2615	72.0	10280	127	0.45	50/100
13	1/2	12.7	18.3	23.0	16.0	2320	64.0	9180	178	0.55	50/100
16	5/8	15.9	21.4	26.2	13.0	1890	52.0	7420	200	0.63	50/100
19	3/4	19.0	25.4	30.2	10.5	1530	42.0	6000	240	0.77	50/100
25	1	25.4	33.3	38.1	8.8	1280	35.0	5020	300	1.06	50
32	1 1/4	31.8	40.5	46.0	6.3	920	25.0	3600	419	1.45	18 to 40
38	1 1/2	38.1	46.8	52.4	5.0	730	20.0	2860	500	1.80	18 to 40
51	2	50.8	60.2	66.7	4.0	580	16.0	2280	630	2.30	18 to 40

         

                             

 Physical Characters Of Common V-belt(wrapped)GB/T1171-2006

  industrial rubber hoses/silicone rubber hose