explosion proof hydrogenation reaction kettle

Specifications

explosion proof hydrogenation reaction kettle
1.explosion proof motor
2.teflon sealing
3.double layers
4.temp range -80-200

explosion proof hydrogenation reaction kettle

 

 

I. Introduction of hydrogenation reaction kettle: 

 

      Reagents are set in the inner layer of double-layer glass reaction kettle, at the same time, vacuum can be taken out and mixing speed be adjusted. Interlayer can lead in refrigerating fluid, water and high temperature liquid to heat and cool the materials. It can be used in the experiment, middle-scale test, and production of chemistry, fine chemical engineering, biological pharmacy and synthesis of new materials. The products can be made into system devices with multi-purpose circulating water vacuum pump, diaphragm vacuum pump, low temperature circulating pump(vacuum), circulating cooler, constant temperature circulator, low temperature cooling liquid circulating pump and closed cooling and heating circulating equipment.

 

II. Characteristics of hydrogenation reaction kettle:

 

 

      1. High borosilicate glass has good physical and chemical properties.

      2. Can be used in wide temperature range from high temperature (200°C)to low temperature(-80°C).

      3. Can work in constant pressure and vacuum, vacuum degree is below 0.095MPa in quiet situation.

      4. Digital display of mixing speed, , frequency conversion, and constant speed mixing system, work steadily.

      5. The sealing method and materials between mixer shaft ,PTFE mixing propeller (paddle),and ketttle cover are Know how of our company.

      6. Corrosion resistant discharge valve is without dead space design.

      7. The cooling or heating solution in the interlayer can be completely removed after reaction.

      8. The whole structure is novelty, practical and beautiful.

 

III. Technical data:

Model	GR-5L	GR-10L	GR-20L	GR-30L	GR-50L	GR-80L	GR-100L	GR-150L
Power(W)	90	90	90	90	140	250	250	370
Power of Explosion Type ( W )	180					370
Stirring speed (r/min)	50~500
Max.torque (N·m)	0.6	0.6	0.6	0.6	0.95	1.7	1.7	2.5
Material capacity(L)	5	10	20	30	50	80	100	150
Lnterlining cover capacity(L)	1.5	3	6	10	16	24	30	45
Power supply (V/Hz)	220/50