Supply 15 Stands Highway Guardrail Forming Machine With Chain Transmission , 10-12M/min

Specifications

 Welcome to view Highway Guardrail Roll Forming Machine

according to customers requirements ,costom roll forming machine

1.Technical parameters:

1. Suitable material: Q235A galvanized steel, width: 440mm, thickness 3.0mm

2. Forming speed: 10—12M/min

3. Forming roller station: 15 stands

4. Leveling roller station, 7 stands

5. Guiding and feeding roller, 4 stands

6. Roller material: Gcr 15 bearing steel after treatment, HRC58-60

7. Roller shaft material: No.45 high grade material after treatment

8. Roller shaft dimension: 100mm

9. Main motor power: 22KW

10. Transmission: by chain

11. Leveling rollers motor power: 2.2KW

12. Hydraulic motor power: 11kw, hydraulic pressure: 20Mpa

13. Punching and cutting type: hydraulic driven, punching, cut after forming,

14. Shear material: Gr12

15. PLC control system,Mitsubishi FX-IS series

16. Cut to length, 10m±2mm

17. Frequency, Dan Fuss

18. Control cabinet, xinjie OP320A

19. Rack material, 400 type steel

20. Boundary dimension, (L) 12.8m×(W)2.3m×(H)1.6m (theoretical evaluation result, for reference only.)

21. Gross weight, 15000kg (theoretical evaluation result, for reference only.)

Spare parts and special tools(according to final packing list)

 2.Components of line:

Material of main equipment:

A: Yes. We have an experienced team for working out the most suitable design and production plan for the machine that you are going to book with us

Q: What do you need to know so that I can have a machine plan from you for our technical people reference?
A: Well, as the basic needed information for designing a machine plan, pls see below details
For the slitting line and cut-to-length: the material type(HR, CR, HDGI, PPGI, SS), thickness and width range, coil weight, cutting speed, slitting numbers(only for slitting line), steel plate required cutting length(only for cut-to-length line)
For the C,Z,W Profile and roof/wall panel roll forming machine: the material thickness range, width range and the profile drawing are required(how many roll forming stands required are depended on the profile drawing)
For the HVAC machine and the stainless steel pipe machine: the wall thickness range and the diameter range of the pipe
Pls also provide us with your special requirements for the machine, for example, you want the machine to be a full-automatic one or semi-automatic one in order to save your procurement budget.
Q: How can we be assured that you will deliver us quality machine with spare parts?
A: We usually require our customers to send the technical people to our factory for checking the quality of the machine before shipping. Considering that the buyer usually is not very familiar with the machine assembling and debugging, so we send the technicians to the buyer`s factory for the installation of the machine provided that the Price Term was conclude on ALL IN basis. In additon, We provide all of our customers with the aftersales-service, its free of charge during the warranty period

EXELLENT QUALITY AND COMPETITIVE PRICE!

CHOOSE US , CHOOSE THE BEST!

Thank you for your time!