DC12V input 10W RGB DMX LED flood light;IP66;high quality;with 15mm 3 core waterproof connector for dmx

Specifications

DC12V input 10W RGB DMX LED flood light;IP66;high quality;with 15mm 3 core waterproof connector for dmx

Features:            

1.Adopting to  high power integrated RGB LED, which ensures light is more uniform,light efficiency is higher.         

2.Standard DMX512 signal input, internal control and external control.           

3.Unique wireless control, control distance up to 50m

4.Built-in 350mA constant current driver design to ensure light for a stable work            

5.Using high transmittance tempered glass,transimittance 93%         

6.Complying with ROHS,absolutely not contain mercury or other harmful substance             

7.Lifespan is over 35000 hours           

8.May realize "online address grogramming 

      

Applications                                                                  

Widely used in various building walls of light color decoration,stage,meeting rooms,display light, ancient building, cultural plaza etc.

 

Parameter Performance:

Material	Die-cast aluminum
Input Voltage	DC12V
Power Efficiency	90
Beam Angle	120º
Led chip	USA Bridgelux 45mil
Power(Single LED)	10W instegrated led chip
LED Qty.	30pcs 1W led inside
Control	DMX512/1990 /RF
Signal Line	With IP66 waterproof gold-plated  terminal connector
RF Frequency	335MHz
RF Distance	30-50m
IP Code	IP66
Operatinal condition	Temperature:-30~50  Humidity:10%-90%RH
Lifespan	>35000hrs

Size: 114 x96x 87.5mm

dmx input and dmx ouput is with 3 core waterproof pigtail:

/store/product/3core-waterproof-connector-with-20cm-long-cable-male-and-female-black-color-the-male-connect-s/701799_601833823.html

 

it is compatible with al of our 15mm series 3 core pigtal,extention.etc;

/store/group/15mm-series-black-waterproof-pigtails/701799_250415853.html

 

 

noted: we will pre-set the dmx address of each light for you before shipment,such as: 123...456...789...

if you want to edit your own dmx address for them,please use the below dmx editor:

/store/product/AT3031-DMX-address-writer-for-setting-the-dmx-address-of-AT-series-dmx-decoders-drivers/701799_578769983.html

 

 

how to set the dmx address by the above editor:

1. Connect dc power to the flood - most likely pink & black wires
2. Cut the ribbon connector supplied with the programmer, and connect the 3 wires to the right of the programmer to GND, DMX+ and DMX- (there is a label on the back of the programmer).   You don't need to connect the SOUT wire.   (in my case, I use black 3-core waterproof connectors for my dmx cabling, so I simply connected a connector to the ribbon cable)
3. Put 3 AA batteries in, and turn on the programmer (leave the 4 dip switches at 0).  It'll show a couple numbers on the display (1-7-2 I think), and then go to 0.
4. Press the FUNC button until 2 is displayed in the left of the display
5. Use the UP/DOWN keys to select the DMX start channel..  In my case, the buttons weren't very responsive.  I needed to hold down the buttons a bit, and sometimes release and try again in order for them to register... You need to choose a number one below your start DMX channel.. So to set the flood to 3,4,5, you need to have 2 selected.
6.  Hit the "Action" button, and then hit it again. (so twice)  The flood should react to this with a couple colour changes.
7. All done - you can disconnect the flood, and it'll be re-programmed.
The programmer actually then adds 3 to the start channel for you automatically, so if you're programming a group of floods, just leave the device turned on, swap the DMX cable to the next one, and hit "action" twice again, and the next one will be done.