Contact Platform Support
Help CenterDSHD-6536C Low Temperature Distillation Tester for Petroleum Products
Related Products
-
DSHP1023 Petroleum Product Ash TesterUS$ 1 - 100MOQ: 1 Set -
DSHD-3146 Benzene Distillation TesterUS$ 1 - 100MOQ: 1 Set
-
DSHP1003-IX Kinematic Viscosity of Liquid Petroleum ProductsUS$ 1 - 100MOQ: 1 Set
-
DSHD-0613 Breaking Point Tester for Oil ProductsUS$ 1 - 100MOQ: 1 Set
-
DSHD-509A Existent Gum TesterUS$ 1 - 100MOQ: 1 Set
A:Brief description:
1.DSHD6536C Lowtemperature Distillation Tester is designed and made as per standards GB/T6536 Test Method
for Distillation Characteristics of Petroleum Products and ASTM D86.
2. Has the function of determine the distillation characteristics of gasoline, aviation gasoline, jet fuels, special boiling
point solvent, similar petroleum products.
B: Main technical features:
1.The electrics parts are controlled by controlling case.
2.The controlling case is made of cold rolled steel. It has an observation window and a built-in furnace. The electric part is at the lower section of the controlling case.
3.The furnace part is composed of SiC furnace base, heater of 1000W/220V, and SiC plate. The position of
furnace can be adjusted by rotating the up and down knob on the controlling case, so that you can adjust the relative
position of distillation flask and the opening of condensation tube. The heating power can be adjusted by rotating the
voltage adjusting knob.
4.The refrigeration bath is made of stainless steel. It contains heating device, refrigeration device, temperature
measuring device and stirring device. The stirring device is driven by a motor.
5.The dimension of condensation tube complies with GB/T6536.
C: Main technical specifications and parameters
1.Power supply: AC 220 V±10%, 50 Hz
2.Heating power: 1000 W
3.Graduated flask cubage: 100 ml. Each scale division is 1 ml.
4.Distillation flask: 125 ml, as per GB/T6536.
5.Thermometer: Total immersion. They are from -2 to 300 °C and from -2 to 400 °C. The scale divisions of them are 1 °C.
6.Moving plate: Made by SiC. Diameters of holes are φ32mm, 38mm, and 50mm.
7.Temperature controller:
(1) Range: 0 °Cto 60 °C;
(2) Temperature accuracy: ±0.5°C
(3) Temperature display mode: Digitally displayed by LED
8.Ambient temperature: ≤30°C
9.Relative humidity: ≤85%
10.Refrigerated compressor: New-type refrigeration compressor
11.Total power consumption: ≤ 2500 W
Send Inquiry to This Supplier
You May Also Like
-
Endress+Hauser E+H Compact Conductivity Device Smartec CLD18-BGGENegotiableMOQ: 1 Piece
-
ASTM D5305 Fabric Strip Tensile Tester for Textile Quality Control LabsUS$ 3000 - 10000MOQ: 1 Set
-
Hydraulic Plastic Flange Connections Cover Plugs SHF SeriesUS$ 0.22 - 0.28MOQ: 2500 Pieces
-
HST Spring Dyno Friction Leakage Fatigue Testing MachineUS$ 5000 - 10000MOQ: 1 Set
-
Gates 550C 550U U550 U-550 U508 U-508 Japan Unitta U-550 Belt Tension Meter New U-508 Belt Tension Meter Upgraded Version U550US$ 1 - 900MOQ: 1 Piece
-
Analytical Balanace.scale ,weichengya Laboratory SupplierUS$ 10 - 35MOQ: 10 Sets
-
Smart MD-3051 Online Density Meter With 4-20mA OutputUS$ 2,380 - 2,500MOQ: 1 Unit
-
5W-300W Sun Simulator Watt Testing 30% Off / Xenon Lamp Sun Simulator Free Sent / Sun Simulator TestingUS$ 7,500 - 10,000MOQ: 1 Set
-
New Design Measuring Meter With Best PerforanceUS$ 1,000 - 1,200MOQ: 1 Piece
-
XK-1 Rotary Switch Life TesterNegotiableMOQ: 1 Set
