powder coating racks warehouse iron rack,vertical racks storage

1.support arm and uprights of powder coating racks are packed by poly straps; poly sheet; and wood pallet;
2. accessories of powder coating racks are packed by cartons or boxes.
3.Cost will be collected if the packing is customized as customers' request of powder coating racks.

ltl

Our Promise as below: ( ^_^ )  drive through rack

1. Material is steel Q235, high-quality steel from Jiangsu Shagang Group Co. Ltd., the top 5 steel manufacturer in China; 

2. Samples could be supplied for you in 3 days; 

3. Products could be customed as your request; 

4. Warranty is one year if not artificial reasons! 

5. Matters not mentioned herein, could be discussed! O(∩_∩)O  

Drive in pallet rack requires fewer aisles, allowing you to store up to 75% more pallets in the same space. 

powder coating racks  for High-Density Storage: 

Drive-In Rack allow a lift truck to enter the rack from one side to pick up or pull out pallets.

This is done because pallets can slide backwards on a continuous rail.

Forklifts drive into the rack to access pallets two or more deep.

You are limited in the depth of storage for a particular bay by the size of your facility.

Drive-In rack are typically subject to more abuse than selective racks due to the way they are utilized, so rack integrity and strength are important factors. It is ideal rack for cooler or freezer applications. 

Last-in,first-out arrangement for your pallets

Drive-In rack offer the ability to store a large amount of similar loads in a smaller area. Selectivity is sacrificed, but storage density is outstanding. Drive In Rack can store up to 75% more pallets in the same space than selective racking -- depending on your application. It requires fewer aisles and is better cubic storage. 

 Double Entry Racks - lift trucks can enter from both sides or a row of racks. The center of the rack row is stabilized by a beam.  

Single Entry Racks - lift trucks can enter the rack from only one side. 

When should you specify powder coating racks ? 

1. Drive-In Warehouse Rack is used to store many pallets of a similar product. Lift trucks drive into the rack to extract the first pallet they come to. This is "Last-In, First-Out" storage.

2. Drive-In Rack are widely used in cold storage applications, due to the need to store as many pallets as possible in as little expensive freezer space as possible.

3. When you have seasonal items that move quickly out of your inventory.

4. When you have a large amount of similar items that can be stored in a single pallet position and accessed last-in, first-out

5.If you don't store a wide variety of loads in the rack.  

powder coating racks Design: 

Load Rails are constructed of durable structural angle steel, providing increased strength and abuse resistance. Standard features include:

1. Structural angle rails "guide" pallets, ease of use and durability

2. Flared rail entry ends allow easy bay access

3. Space-saver low profile arms increase clearance and decrease possible product damage

4. Welded rail stops prevent loads from being pushed off, improving safety

5.75mm vertical adjustability

6. Welded aisle-load arms to eliminate hazardous load projections into aisles

7. Grade 5 hardware

Quick Instruction for Business of powder coating racks :

powder coating racks Showcases:

Production Procedure of powder coating racks : 

Accessories of powder coating racks :

 Packaging & Shipping

Packing of powder coating racks :

Loading of powder coating racks : 

CE & Raw material purchasing sheet of powder coating racks :

FAQ of powder coating racks : 

1. Q: Are you a factory or trading company? 
----A: We are a manufactory powder coating racks powder coating racks

2. Q: Where is your factory located? How can I visit there?  

-----A: Our factory is located in Nanjing, Jiangsu Province, China. 

1) You can fly to Nanjing Airport directly. We will pick you up on Nanjing Lukou International airport; 

2) You can fly to Shanghai Pudong International Airport then come to Nanjing by High-speed railway, then we will pick you up in the railway station.

All our clients, from domestic or abroad, are warmly welcome to visit us! 

3. Q: What makes you different with others? 

----A: 1) Our Excellent Service 

 For a quick, no hassle quote just send email to us

 We promise to reply with a price within 24 hours - sometimes even within the hour.

 If you need an advice, just call our export office at 0086-133 5772 5654, we will answer    your questions immediately.

2) Our quick manufacturing time 

For Normal orders, we will promise to produce within 15 days.

As a manufactory, we can ensure the delivery time according to the formal contract.

3) Our Special Export Design 

More attention will be paid to the export packages.

1.Small shevling, like boltless shelvng and industrial rack is box packing or upon customers request;
2.For big size of rack, beam and uprights are packed by poly straps; poly sheet; and wood pallet;
3. accessories of steel pallet racking are packed by cartons or boxes.

4) Our Warranty Time   steel storag rack

The High Standards in the Design and Manufacturing ensure us to support the products within 10-Year Warranty Time for your normal use, it is the Longest Manufacturer's Warranty! 

4. Q: How about the delivery time? 

----A: This depends on the product. Typically standard products are delivered within 10 days. 
The delivery time of the special products is according to the time of setting up of the tooling.

5. Q: What is the term of payment? 
----A: 1) T/T payment;   2) LC;   3) Western Union; 4)MoneyGram  5)PAYPAL  6)Escrow

6. Q: May I know the status of my order? 

----A: Yes .We will send you information and photos at different production stage of your order. You will get the latest information in time. 

7. Q: Are samples available? 

----A:  Yes, we can send some sections of samples for your reference by express.