1.2mm EPDM waterproof material/ Impermeable membrane

EPDM pond liner manufacturer with high quality

1.Introduction

  EPDM waterproof membrane is  made from ternary ethylene-propylene rubber, which is designed for waterproofing of exposed and non-exposed applications. The product adopts the world-advanced equipment of cold feeding extrusion and continuous vulcanization technology. EPDM waterproof membrane is of high elasticity among high polymer waterproof materials and becomes a world-popular waterproofing material.

2.Specification

3. Applications

(1) Roofs, Basement, Toilets

  (2) Industrial and civil building waterproofing

  (3) Geosynthetic liner for swimming pool, channels, irrigation system

  (4) Especially suitable for projects with high requirements in durability, anti-corrosion and deformation

4.Advantages

1)  Excellent physical and mechanical performance

2)  High tearing resistance

3)  Good deformation adaptability

4)  High puncture resistance

5)  High aging resistance

6)  UV resistance

5.Pictures for your reference

Our Factory Show

Certificaiton Show

6. Technical Index

7.  Construction Technology

1)     Base processing: the base surface must be clean, solid, level, dry; no grit, rift and loosing dust. For a large recess, fill it with cement mortar and then level it. Remove the protrusion and clean dust. If working on base slab or lateral face, water lowering should be done.

2)     Painting primer: before laying the membrane, clean the dust on the surface of concrete base with dust catcher or dust-blower.

3)     Heat to melt: place membrane correctly, fire torch, heat the membrane with base entirely, when the surface of the membrane is black and bright with a fusion layer, apply the membrane and press it into a solid and flat state. Before the membrane is cool, seal the edge of joint by float.

4)     Requirements for lapping: There should be less than 3 layers of lapping, with the joint seams appearing as "T" type, avoid 4 layers of lapping. The width of longitudinal lapping is between 50 and 80mm, and of end-lap joint 100mm.

Sample is free of charge.

Reasonable Price, Excellent Quality & Attentive Service

The delivery time is about 15-20 days after receiving the deposit.

We offer not just excellent products but service and market solutions.

Welcome to visit our homepage or contact with us for more information. Thank you.