Home > Products > SBS/APP Modified Bitumen Waterproofing Membrane > APP Modified Asphalt Waterproofing laminate for road
APP Modified Asphalt Waterproofing laminate for road
- 20000 Square Meter / Square Meters per Month
- Shanghai Guangzhou
- T/T L/C D/P D/A Credit Card PayPal
- Modified SBS Elastomeric Bituminous Waterproofing Roofing laminate
- 3mm APP modified bituminous waterproof roll
- 4mm APP modified bituminous waterproof roll
- SBS Super Quality Modified Bitumen waterproofing laminate
- SBS polyester asphalt waterproofing roof felt products
- APP modified bituminous waterproof roll
Product Details
Place of Origin: | Hubei, China | Brand Name: | STAR | Model Number: | ESE-102 |
Product Description
APP Modified Asphalt Waterproofing laminate for road
1.Introduction
APP (Atactic Polypropylene) modified bitumen membrane is made by saturating the base in bitumen, or thermoplastic elastomer (such as SBS, APP, APAO, APO), reinforced with polyester or fiberglass, finishing the upward face with polythene membrane, fine sands or mineral slates (or grains) or etc.
2.Specification
Thickness | 3mm, 4mm, 5mm |
Width | 1m |
length | 7.5m, 10m, 15m, or on demand |
Base | Polyester or Fiberglass felt |
Surface | PE film, Aluminum foil, Yellow sand, Shale gravel(Schist), colored sand |
Type | could self-adhesive |
Notice | APP modified bitumen membrane is more suitable for hot district with high temperature. Could be self-adhesive modified bitumen membrane |
3. Applications
1) Roof and underground in industrial and civil buildings.
2) Bridge, subway, tunnel, swimming pool, etc.
3) Waste landfill, sewage plant, irrigation system, etc.
4.Advantages
1) The SBS modified bitumen is showed good performance on waterproofness;
2) It will be a high-strength membrane to resist water;
3) Puncture-resisting, tear-resisting, corrosion-resisting, mould-resisting and weather-resisting;
4) Good tensile strength and elongation;
5) Strong adaptability for substrate shrinkage, deformation and cracks;
6) Both high and low temperature resistance, especially in cold areas;
7) Convenient to apply: use heat fusion method in all seasons.
5.Pictures for your reference
Our Factory Show
Certification Show
6. Technical Index(Executive standard: GB18242-2008)
APP Waterproof Membrane Reinforced base | PY | G | ||||
Type | I | II | I | II | ||
Content of soluble substances(g/m2)≥ | 2mm | 1300 | ||||
3mm | 2100 | |||||
4mm | 2900 | |||||
Water impermeability | Pressure (Map) | 0.3 | 0.2 | 0.3 | ||
Retention time (min) | Impermeability within 30 min | |||||
Heat resistance °C | 110 | 130 | 110 | 130 | ||
Tensile strengthN/50mm≥ | Longitudinal | 450 | 800 | 350 | 500 | |
Transverse | 250 | 500 | ||||
Elongation at break %≥ | Longitudinal | 25% | 40% | ------- | ------- | |
Transverse | ||||||
Tear strength N≥ | Longitudinal | 250 | 350 | 250 | 350 | |
Transverse | 170 | 200 | ||||
Low temperature flexibility°C | 3 | -10 | 3 | -10 |
7.Storage and Transportation
1) Different type and specification should be stacked separately;
2) Avoid sun-scorched and rain-drenched, Be ventilation;
3) The storage temperature should below 50°C;
4) It have to be one storey when keep in storage stand on end, and shouldn't be more than two storeys when transporting;
5) Avoid tilting or lateral drift, Covered with tarpaulin if need;
6) Base on the normal storage and transportation, the storage period is one year from the date of production.
8. Construction Technology
1) Base processing: the base surface must be clean, solid, level, dry; no grit, rift and loosing dust. For a large recess, fill it with cement mortar and then level it. Remove the protrusion and clean dust. If working on base slab or lateral face, water lowering should be done.
2) Painting primer: before laying the membrane, clean the dust on the surface of concrete base with dust catcher or dust-blower.
3) Heat to melt: place membrane correctly, fire torch, heat the membrane with base entirely, when the surface of the membrane is black and bright with a fusion layer, apply the membrane and press it into a solid and flat state. Before the membrane is cool, seal the edge of joint by float.
4) Requirements for lapping: There should be less than 3 layers of lapping, with the joint seams appearing as "T" type, avoid 4 layers of lapping. The width of longitudinal lapping is between 50 and 80mm, and of end-lap joint 100mm.
Sample is free of charge.
Reasonable Price, Excellent Quality & Attentive Service
The delivery time is about 15-20 days after receiving the deposit.
We offer not just excellent products but service and market solutions.
Welcome to visit our homepage or contact with us for more information. Thank you.
Contact Us
- Wuhan Star Waterproofing Co., Ltd.
- Contact nameStar
- Phone86-27-84777225
- Addresshuangjinkou industrial area, hanyang, wuhan china Wuhan,Hubei
- app bituminous laminate for fabric waterproofing rolls
- RUbber SBS modified roofing bitumen elastomeric waterproof membrane
- Bituminous sheet waterproof fabric polyester rolls for app/sbs for roofing product
- APP Construction use plastic waterproof laminate for fabric
- 5mm SBS modified bituminous waterproof roll
- APP Modified Asphalt Waterproofing laminate for fabric
- SBS modified bitumen waterproof roofing material in rolls for basement
- APP Modified Bitumen Waterproofing laminate for flooring
- APP Modified Asphalt Waterproofing Membrane
- Rubber underground&basement SBS modified bituman waterproofing products in rolls
- SBS Fiberglass modified bituminous waterproof membrane
- Rubber underground&basement SBS modified bituman waterproofing membrane
- product of modified asphalt APP bituminous waterproofing membrane for roofing
- Bitumen Waterproof flashing tape
- Bituminous sheet waterproof fabric polyester rolls for app/sbs for bridge product
- Bituminous product for fabric waterproof fabric polyester rolls of app/sbs
- Rooftex roofing membrane reinforcement is suitable for manufacturing bituminous waterproofing
- Cheap Roofing waterproof Underlayment--factory sales
- Polyester Reinforce Waterproofing material
- Asphalt flexible modified bitumen construction waterproof sheet for roofing
- 3mm SBS mineral face roofing waterproof membrane
- 4mm quality alumium sbs waterproof roof membrane
- 5mm sbs Granules surface modified bitumen waterproof membrane
- Excllent Wet Placement Waterproof Sheet
Popular Searches
- sbs plastic
- lowes rubber roofing
- water proof material
- thatch roofing waterproof membrane
- pet membrane
- acs membrane
- activate membranes
- activate membrane
- asphalt waterproofing membran
- Roof Breathable Membrane
- bitumin membrane
- breathable house wrap
- bitumin suppliers
- e membrane
- Ss Membrane
- excell membrane
Find Similar Products By Category
- Construction & Real Estate > Waterproofing Materials > Waterproof Membrane
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Star
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-