Kafuter-Windshield/Car Glass Adhesive/ PU Sealant/Polyurethane Sealant

Specifications

polyurethane sealant
1.one-part, black paste
2.general purpose,fast cure in minutes
3.environment, easy to use

               Kafuter-Windshield/Car Glass Adhesive/Polyurethane Sealant 

Characteristics:

 

*One-part, fast cure, polyurethane structured windshield sealant

* Fast cure, easy to inject, no solvents, no flowing on elevation coating

* Low-temp tolerance, oil and water proof, salt-fog resistance, and anti-aging, crack, and fatigue.

* It is an environment-friendly product, no poison and pollution.

* Have excellent compatibility with glass, metal, wood, plastics, and other multi-substrates.

* The cured surfaces can be grinded, sprayed, and coated.

 

Applications:

          Direct assembly and maintenance of windshield in cars, ships, etc. such as, welding and joint sealing of cars, railways, containers, ships, and freezer pipes, flexibly bonding the car roof and side boards with frameworks, and softly bonding the wooden board with sub-frame in chassis.

 

Properties:

Item	Windshield Polyurethane Sealant
Appearance	Black Paste
Density(g/cm3)	1.35±0.05
Initial Cure Time(25°C,min)	10~30
Sagging(mm)	≤3
Cure Time(mm/d)	3~5
Volatility(%)	≤3
Hardness(Shore A)	55±5
Tensile Strength(MPa)	≥5.0
Shear Strength(MPa)	≥2.0
Elongation(%)	≥400
Extrusion(ml/min)	≥80
Working Temperature Range(°C)	+5~+35

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Packing:

310ml/aluminium tube

20tube/case

 

 Directions

1. Use cotton yarn with acetone ethanol or other organic solvents to clean off the rust dust,water,oil,etc.
2. Remove the cover and pierce the inner seal, and then cut the nozzle in triangle shape to make sure the glue squeeze out with the same shape, using glue gun put the glue on the surfaces.

3. Best used in temperature of 5°C-35°C and humidity 35%-65%RH, keep the working condition completely ventilated

4. use the alcohol to clean the uncoated surfaces, after injecting,please tighten-seal the remained glue in a dry and cool place. 

 

Notes:

(1)Keep away from children

(2)Avoid contacting with skin and eyes; if contact, please flush with  water, or else become seriously, go to hospital