Contact Platform Support
Help CenterKafuter K-302 UV Hpmc for Tile Adhesive
Related Products
-
Kafuter K-302 UV Adhesive Fiberglass Mesh TapeUS$ 4 - 10MOQ: 10 Cartons -
Kafuter K-302 UV Adhesive Felt StripsUS$ 4 - 10MOQ: 10 Cartons
-
Kafuter K-302 UV Self Adhesive Metal PlateUS$ 4 - 10MOQ: 10 Cartons
-
China Manufacturer Kafuter K-302 UV Metal Adhesive LettersUS$ 4 - 10MOQ: 10 Cartons
-
Kafuter K-3022 uv Cure Acrylic Adhesive, uv Light Cure Adhesives for Glass uv Cure AdhesiveUS$ 8 - 15MOQ: 1000 Pieces
Specifications
hpmc for tile adhesive1.one part,flexible liquid
2.for metal to glass bonding
3.cure under UV/V Lamp
4.50ml/bottle
kafuter k-302 UV hpmc for Tile Adhesive
( For glass to metal/glass to glass bonding)
Characteristics:
UV light curing adhesive is one-part, high intensity, uv curing modified acrylic adhesive. general purpose, good storage abilitiy, and have great adhesion to glass, crystal, and many other metals. Especially for small area of metal to glass, and glass to glass bonding.
Application: Using in glass with metals bonding, this glue can bond glass, crystal to metals like aluminum, carbon steel, stainless steel, and galvanized sheet steel, etc.
Typical Properties:
| Test Item | UV Adhesive/UV Glue K-302 |
| Viscosity | 600±100 mpa |
| Appearance | colorless or pale yellow liquid |
| Set Time |
6s/high flourescing light 10s/ UV light |
| Cure Time(s) |
200s/high flourescing light 300s/UV light |
| Harness(Shore A) | 69 |
| Elongation at Break(%) | 120 |
| Shear Strength | >10mpa |
User's guide:
Kafuter uv light adhesive is recommended for big area glass or crystal bonding .uv adhesive K-302 can be cured by exposure to UV/Visible light of sufficent intensity. surface cure is enhanced by exposure to uv light in the 200 to 260 nm range. cure rate and ultimate depth of cure depend on light intensity,spectral distribution of the light source, exposure time and light transmittane of the substrate through which the light must pass.
Notes:
1.This product is light sensitive, exposure to daylight, UV light and artifical lighting should be kept to a minimun during storage and handling.
2.For best peformance bond surfaces should be clean and free from grease.
3. cure rate is dependent on lamp intensity, distance from light source, depth of cure needed or bondline gap and light transmittance of the substrates through which tha radiation must pass.
Packing Specifications:
50ml/bottle |
10bottle/box |
80bottle/case |
Send Inquiry to This Supplier
You May Also Like
-
Factory Sale TPU Material 65A, 70A, 80A TPU Granule for Shoe Soles/Sole Air Cushion & Sports Equipment ManufacturingUS$ 2.22MOQ: 1 Kilogram
-
Silicone & ProductsNegotiableMOQ: 2400 Kilograms
-
50ml Loctite Screw Glue 290 Penetrating Medium Strengthanti-loose Metal Thread Locking Agent 222 243 242NegotiableMOQ: 1 Bag
-
Low Temperature Hot Melt Adhesive for Baby Diaper and NapkinsUS$ 2.8 - 3.2MOQ: 1 Ton
-
2016 Zhengzhou Factory Natural Artificial Stone Mold for Making Artificial StoneUS$ 1 - 30MOQ: 1000 Pieces
-
Hot Seal de High Quality Silicon Rubber Bushing From China O RingsUS$ 0.1 - 10MOQ: 100 Pieces
-
Aluminum Foil Self-adhesive TapeNegotiableMOQ: 100 Rolls
-
Glue Stick, Hot Melt Glue Stick, Glue Gun StickUS$ 2.9 - 2.9MOQ: 100 Kilograms
-
Best Quality Cheapest Animal Shape Silicone Rubber Oven MittsNegotiableMOQ: 2000 Pieces
-
8 Pieces in a Pack Super GlueUS$ 0.33 - 0.33MOQ: 1800 Sets
