Kafuter-Epoxy Glue/Epoxy Adhesive/Epoxy Resin Hardener

Specifications

Epoxy Glue
1.two-part, fast cure
2.form a tough film after cured
3.quick repairing cylinderical parts
4.150g/pairs

             Kafuter- Epoxy Glue/Epoxy Adhesive/Epoxy Resin Hardener

Main Characteristics:

 

This putty is two-part materials which was composited by metals, high-temp modified resin, and hardener. Room controllable time is 30-45 min, fast cure by heating, high hardness after cured, can be sanded and polished. The temperature range is 100°C to 150°C.

 

 

 Applications:

Using in repairing the cracks and gaps in different kinds of cylinders, metal shells, and water tanks, etc.

 

Typical Properties:

Appearance(by visual):	A:silver viscous liquid B:yellow paste
Shelf Life(Room sealed	Two years
Mix Ratio	A:B=2:1
Hardness(shore-D)	≥80(25°c)
Shear Strength (24h/25°c)	≥15mpa

 

How to Use:

(1) First, clean the surface by removing the oil, stain,etc.

(2) Mix glue A and B evenly by the ratio of 2:1, and then coating it on the bonded surface.

(3) After 24 hour at room temperature of 25°c, it can get 70%~80% working strength, but if heated at 80°c, it can get full cure and highest working strength.