High Performance 3D Orientation Sensor IMU Low Noise High Shock Resistance Performane IMU

1pcs/box ,100pcs/ctn

High Performance 3D Orientation Sensor IMU Low Noise High Shock Resistance Performane IMU

AH106B is MEMS inertial measure unit composed of three axis MEMS gyroscope(measure the three directions absolute angular rate of carrier), three axis accelerometer(measure the three directions linear acceleration). It output analog signal, the signal goes through 24digit A/D enhancement, sampling and analog-digital conversion, enters CPU.The aquisition CPU transmits the original code to compensation calculation CUP through serial port. The gyroscope signal is pulse signal, it enter compensation calculation CUP without conversion. The compensation calculation CUP processes calculation first, and temperature compensation, scale factor compensation, gyroscope bias&Incremental calibration bias correction, installation bias compensation, non-linearity compensation, then the angular rate and acceleration data in motion coordinate of carrier are output at last. Digital version AH106B adopts serial port directly, RS232, RS485, RS422 are available. Analog version AH106B output 0-5v or 4-20mA after digit-analog conversion of calibrated data.
Main features
Output three axis linear acceleration, gyroscope

full temp. Compensation

high speed output

Pure dynamic inertial measurement
long service life, high stability

high cost-effective
24 digit A/D sampling

High performance in anti-impact, anti-shock, waterproof
compact and light design

digital/analog type available
DC+9~36V power suppler

wide working temperature
Application
UAV posture control

vessel posture calculation

underwater robot

Agricultural machinery control

Communication vehicle radar

RC Helicopter
Truck - mounted satellite

Industrial Manipulator

robot
3D Virtual Reality

Ships electronic compass bias compensation
Camera Pan&Tilt

GPS combo

Technical index of accelerometer  

 technical index of gyro

working condition

Product Show

Working Principle

Shell Size Chart
structural rigidity, aperture coupling reduce and electromagnetic shielding are achieved by whole cutting process. The shell groove design makes it beauty, lighter and better heat dissipation(natural cooling, no need of additional cooling equipment) without compromise of structural rigidity, outline drawing as below:

Size : L104mm *W60mm *H65mm

Installation precautions
Make sure correct installation, wrong installation may cause error, pay attention to one surface, two lines:
1)The Sensor mounting surface and the measured surface must be fixed closely, smoothly, stable, if mounting surface uneven likely to cause the sensor to measure the angle error.
2) The sensor axis and the measured axis must be parallel ,the two axes do not produce the angle as much as possible.
Measuring direction

RION’s products software debug
AH106B would be equipped with professional RION’s serial port debug software. The software. In convenience of debug and demonstration, it is designed inspired by INS software experience,software engineering,promoting the reliability, efficiency, stability of product. It is easy to maintain, test. It is used VC language. User could download from Rion’s website or find universal version in other professional websites.
(analog output type do not need the software)

Packaging & Shipping  

Packaging: carton with sponge

• Delivery time: within 7 business days for common order after we receive the full payment
• Shipping time: 3-5 work days by DHL/UPS/FEDEX/TNT; 5-7 work days by EMS.

Pre-sale service

• Evaluate your application, recommend the most suitable item;
• Make you fully understand the products, usage and maitenance;
• Answer all your questions, and let you have no doubt before make any decision;
• Adjust, revise or redesign our products to consist with the application(for customized service);

Sales service

• Recommend the best payment term and shipping term for you;
• Make official quotation and PI with company Stamp;
• Keep you posted about the products producing;
• Send exactly requried products on time;
• Provide tracking NO. and inform you when products leave factory and arrive destination;

Post-sale service

• Instruct products connection, installation and application;
• if anything happen to products(barely will), engineer will evaluate the problem, solve the problem or exchange malfunction item for free, make sure you get the best solution and service.
• Keep tracking the products usage and ask for suggestion and advice.

Shenzhen RION, as a positon sensor manufacturer and solution expert, attaches much importance to products reseach and develop which spend over 20% of annual profit. We have the most R&D personnel and best technology comparing with our peer to raise our up on the high level of sensor field. And we orientate ourself to market tightly and engage ourself into providing the most considerate and professional solution and service to customers. RION introduce advanced equipment, such as TEMP&HUMI chamber, salt spray corrosion test chamber, high precision automatic turntable, high precision marble checking platform, digital thermostat drying oven, electrostatic discharge tester and 360 degree mechanical turntable etc, and set up Environmental Testing Laboratory, Product Aging Chamber, 2D&3D Posture Calibration Room and Shake&Impact Test Room for R&D and factory test.

Beside owning excellent hardware, RION also developed 15 sets of software independently and keep developing, including multi-sensor monitor software, remote sensor monitor software, synchronous dynamic l tracking 3D presentation software, tilt switch early warning and debugging software and sensor serial port setting presentation software etc which could apply to XP, Win7, Win8, WinCE and Android system. RION, owning talent and diligent personnel, advanced technology and market-orientated strategy, engages itself in offerring you the most considerate and professional solution and service of position sensor.
You satisfaction is our mission.

Certificates & Honor

• How to choose suitable item: bowse our webiste and choose products by catalog, or contact us directly by email, skype, TM.
• How to buy: We accept the payment by Escrow/Alipay,including Paypal,Credit Card and T/T, WU.
• How to ship: by DHL, Fedex, UPS, EMS, TNT and ARAMEX Express mainly, we have long term and reliable logistic cooperator to ensure the safety and cost-saving
• How to apply: We provide instruction manual, software and online service to instuct you to connect, install, use and maintain our products.
• What if anything happen to products: contact us, we will evaluate the problem and instruct you, exchange the wrongly purchased item or fix the malfunction item for free...till you get the best solution.
• What if no suitable item to be found: customerized service is available.
• How to cooperate: we offer technical support, products info, samples, favorable terms&condition and sales support in concerned region.