china laboratory furniture work table

 All-steel laboratory workbench is easy to clean and durable. It has been acceptedby many customers in the domestic and abroad, such as bloodstations system, hospital system. And some laboratories having special requirements for security will also choose whole steel laboratory furniture.

1.Using 40mm*60mm or 30mm*30mm, 2.0mm thick square steel pipe as main frame

2.surface electrostatic spraying epoxy paint, resistant to a high temperature and acid alkali

3.Cabinet use high-quality melamine board, high-quality PVC banding.

4.Overall bearing property not less tan 350kg/m2.

All timberwork laboratory furniture use the melamine board as the backing material, 2mm thick PVC edge banding. Mesa uses epoxy resin table-board or solid board or overlaying board and its structure is stable, beautiful and practical.  Configurating 100mm skirting board between cabinet and mesa, provided with a rubber adjust foot, the coverage is more than 30mm. Cabinet has a variety of color to meet different customers for total laboratory tonal harmony requirements.

1.power sockets can install on the reagent rackpipeline to meet laboratory needs.

2.Cupboard door use advanced fire prevention board as material.

3. Removable backboard, easy to maintenance gas, electricity and water

4.PVC skirting board resistant to acid and alkali, moisture proof, prolong service life.

 Along with the development of science and technology, scientific researchers have a higher demand to the laboratory's flexibility and function. Steel structure laboratory worckbench arises at the same time. It regards independent componets as the basic unit and can free adjust reagent frame and condole ark height. It can also remove, interchange and combinate in order to meet the work process.

1.Using 1.0.1.2mm thick cold-rolld steel board as the substrate.

2.Surface processedby phosphate, pickling and epoxy resin power paint.

3.Resistant to acid and alkali, and high temperature,good bearing performence

4.Good appearance and long service life.

 Product show:

Packing: Carton or plywood packing

Shipping: within 30 days after receive the deposit

 Research and manufacture development is the purpose we always follow for years, and also enjoy providing customer-oriented services , in particular any ODM/OEMbusiness.

When we begin to cooperation, we will provide the following services for you

1,Completely according to your request to production of goods for each one.

2,Report the production progress at any time, and send pictures to you to check.

3,Packing like picture. the packaging is solid and firm. Cartons will be printed on your company's information, can be done without any information of our company if you need.

4,Have corresponding label on each product of the packaging , it is easy to put and installation.

5,Documents provided accurately.

6,Follow up the shipping company information at any time, to remind the time of arrival.

7,After receiving the goods, we will send you the installation video or installation drawing, solve any problems for you at any time.