Home > Products > Z-wave PWM(smart power meter) > Z-wave smart energy switch module, white
Z-wave smart energy switch module, white
- 1000 Piece / Pieces per Month
- Shenzhen
- T/T L/C D/P D/A Credit Card PayPal
Product Details
Place of Origin: | Guangdong, China | Brand Name: | EVA LOGIK | Model Number: | ZWP76 |
Product Description
Introduction
This module is designed to operate in a wall switch box or in locations where the control of an electric device is needed. It is also possible to send a signal to any system that is to be integrated with Z-wave system.
Technical data
* Operating Voltage:230Vac/60Hz 120VAC/50HZ
* Operation Temperature: 0 ~ 40℃
*Maximum Load: 10A (2000W)
* Metering: W/V/A/KWH
* Electricity consumption: <0.8W
*Range: 30m line of sight
*Dimensions(L*W*H): 50* 50 *21mm
*Frequency:868.4MHz/865.2MHz/869.2MHz/908.4MHz/921.4MHz
Installation
1. Before installation ensure that the voltage supply is disconnected.
2. Connect ZWP76 module as shown on above diagram.
3. Place the Module in the switch box.
4. Arrange the antenna (tips are presented as above diagrams)
Do not cut or shorten the antenna - its length is perfectly matched to the band in which the system operates; Locate the antenna as far from metal elements as possible (connecting wires, bracket rings, etc.) in order to prevent interferences.
5. Connect the device in accordance with the wiring diagram presented in Wiring diagram. Switch on 230V of the mains voltage.
6. For “Add” in a network: Put the Z-wave interface controller into “Add” mode, and following its instruction to add the ZWP76 to your controller. To get in the “Add” mode, the distance between ZWP76 module and controller is suggested to be in one meter. Quickly pressing the learn switch of ZWP76 for 1 second at least & release to be included.
7. For “Remove” from a network: set up the Z-wave interface controller into “Remove” mode, and following its instruction to delete the ZWP76 from your controller. Press the learn switch of ZWP76 for 1 second at least &release to be excluded.
8. For ”Condition” which is controlling other devices of Z-wave system, Condition ensures direct transfer of control commands between devices, and is performed without participation of the main controller. e.g. Dimmer, Switch (ON-OFF), Door/Window sensor, PIR, Shutter or scene (scene may be controlled only through the ZE200 gateway).
Safety and maintenance instruction
- Make sure that all electric connections and connection cables meet the pertaining regulations and are in conformity with the operating instruction.
- Do not overload electrical outlets or extension cords, fire or electric shocks can be the result.
- Please contact an expert in case you have any doubts about the mode of operation, the safety or connecting the appliances.
- Keep all parts away from young children’s reach.
- Do not store this item on wet, very cold or warm places, this can damage the electronic circuit boards.
- Avoid dropping or shocks, this can damage the electronic boards.
- Never replace damaged power cables yourself! In such case, remove them from the net and take the devices to a workshop.
- Wireless system are subject to interference from cordless phones, microwaves, and other wireless devices during installation and operation.
Maintenance
The devices are maintenance-free, so never open them. The guarantee becomes void when you open the appliance. Only clean the outside of the devices with a soft, dry cloth or a brush. Prior to cleaning, remove the devices from all voltage sources.
NOTE
Do not use any carboxylic cleaning agents or petrol, alcohol or similar. These will attack the surface of devices. Besides, the vapors are hazardous to your health and explosive. Do not use any sharp edged tools, screw drivers, metal brushes or similar for cleaning.
Warranty 1 year
Contact Us
- Dongguan NIE Technology Co., Ltd.
- Contact nameWinnie Wen Chat Now
- Phone0086-769-33379207
- AddressThird Floor, Building B, Licheng Industry City, Zhendi Village, Xinan Community, Changan Town
- Home use plug-in socket built-in power meter for Z-wave home automation
- Home use insert switch module build-in power meter for Z-wave home automation
- Z-wave power socket with different plug (ZWP68)
- EVA LOGIK plug-in socket built-in power meter (ZWP68)
- Z-wave In-wall outlet built in power meter (ZWP32)
- UL certificated energy outlet, white
- EVA LOGIK wireless outlet with power meter, white
- Factory supply Z-wave energy outlet, white
- Made in China energy outlet, white
- Z-wave smart plug socket with power meter (ZWP68)
- Home automation plug-in socket build in power meter
- Remote control plug-in socket with power meter (ZWP68)
- Z-wave energy plug-in socket with CE certificate (ZWP68)
- Z-wave energy saving plug-in (ZWP68)
- OEM smart home Z-wave wireless remote control socket 220V (ZWP68)
- EVA LOGIK insert switch module build-in power meter (ZWP76)
- Remote control power consumption switch module (ZWP76)
- Wireless remote power switch module (ZWP76)
- Factory supply switch module build in power meter (ZWP76)
- Made in China insert switch module with power meter (ZWP76)
- Multiple switch socket build in power meter (ZWP68)
- Changeable plug & socket switch build in power meter(ZWP68)
- Z-wave smart switch plug-in socket (ZWP68)
- Z-wave wall plug socket with power meter (ZWP68)
Popular Searches
Recommended Products
- 8-way RDM splitter
- 8-way RDM splitter
- Art-Net DMX512 Network Converter 4ch
- 8-way RDM splitter
- ARTNET to DMX512/RDM 8 port Expander
- ARTNET to DMX512/RDM NODE 8CH
- 8way hanging RDM signal distributor
- 4way hanging RDM signal distributor
- 8way RDM signal distributor
- DMX512 8way Hanging Splitter
- DMX512 4way Hanging Splitter
- 8way DMX512 signal distributor
Find Similar Products By Category
- Lights & Lighting > Other Lights & Lighting Products
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Winnie Wen
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
*Email
Please input the mailbox.
-
Mobile