Wireless lamp holder

Feature

E27 standard screw port, easy to install

RF wireless, no direction

Learning code, no interference                                      

Technical data

Model: RF45

Working voltage: AC110V~250V /50/60Hz

Load power: 50W (Incandescent lamp/Power

           Saving lamp/LED lamp)

Remote distance: max 50 m

Warranty: 1 year

Installation

This lamp holder uses standard E27 screw port which is suitable for most of lamps. When first use, please power off the electric and unscrew the lamp, then screw this holder on, after that, screw and tighten lamp to this holder.

Pairing

This set of holder and remote are paired well when first use. If you want to change remote or add a new one, please re-pair them as below:

Single ON/OFF: Turn on the lamp first, press the button on the holder, then the lamp will power off. In 5 seconds, press the button on remote controller, then the lamp will flicker twice. Press the remote button again to quite learning status or it will quite by itself after 10 seconds. Pairing is finished.

This function is pressing remote button, it is on, press again, it is off.

ALL ON: Turn on the lamp first, press and hold on the button on the holder for 15 seconds, then the lamp will power off. In 5 seconds, press the button on remote controller, then the lamp will flicker twice. Press the remote button again to quite learning status or it will quite by itself after 10 seconds.

This function is press the remote button, it is just on.

ALL OFF: Turn on the lamp first, press and hold on the button on the holder for 10 seconds, then the lamp will power off. In 5 seconds, press the button on remote controller, then the lamp will flicker twice. Press the remote button again to quite learning status or it will quite by itself after 10 seconds.

This function is press the remote button, it is just off.

Clearance: Turn on the lamp first, press and hold on the button on the holder for 20 seconds, all the learned remote will be cleared.