mini circular lawn mower wood cutting blade

HSS-DM05
High Speed steel Molybdenum
M2

Circular saws in high speed steel (5% molybdenum content) suitable for cutting-off steels and alloys with hardness between 500N/mm2 and 800N/mm2. The saw blades are used on manual, Semi-automatic and full automatic sawing machines.

HSS-C05%
High Speed steel Cobalt
M35

Circular saws in super high speed steel (5% cobalt content)suitable for cutting-off steels and alloys with hardness above 800M/mm2. The saw blades are used on semi-automatic sawing machines.

EXCELLENCE
stems form specilization

Chromium Nitride coating-CrN
CrN is a specialized PVD coating that resists adhesive wear, corrosion and oxidation. Strongly
recommended for cutting copper and titanium. It has obtained achievements in cutting off operations of
brass, bronze and other light alloys.

Titanium Nitride coating-TIN
This is an excellent PVD coating for protecting saw blades form wear, which is a good choice for iron
based material and cutting conditions requiring resistance to both abrasive and adhesive wear.

Titanium Carbonit nide coating-TiCN
TiCN is “high performance PVD coating suitable for severe abrasive wear cutting
conditions. Recommended for high tensile strength materials above 800N/mm2 and stainless
steel. Responds very favourablely to high speed and feed rates, coating thickness 0.03mm

Special Oxidating-VAPO
It produces a layer of iron oxdie (Fe3O40) on the surface which increases the wear-resisting and
increases the overall life. Suitable for general cutting work.

Titanium Aluminium Nitride coating-TiAN
TiAN is a new multi-layer wear protecion PVD coating. Recomended for high tensile strength
materials above 800N/mm2 and stainless steel. Responds very favourablely as well as conditions like
dry cutting.

Tooth form “A” and “AW”

How to choose the right tooth form?
For thin Metal Slitting Saw Blades with a tooth pitch up to approx. 3.0mm Advisable for brass, tooth form “A” is
suitable for slotting materials. All teeth of tooth form “AW” are bevelled alternatively.

Tooth form “B” and “BW”

Suitable for cutting tubes and profiles made of steel or non-ferrous metals. Tooth form “B” is specialized for cutting very thin walled popes and profiles. All teeth of tooth form “BW” are bevelled alternatively.

Tooth form HZ

This tooth is also known as form “HZ”. Teeth are ground according to the roughing and finishing tooth system. A tooth pair is consisting of one roughing tooth(1/3 cutting width) and one finishing tooth(2x1/3 cutting width). According to the triple chip geometry the roughing tooth is approx.0.2-0.3mm higher compared with the finishing tooth. Tooth form “HZ” is suitable for cutting solid materials.

Tooth Form BR

Tooth form BR is a parrot tooth with chip breaker.This tooth form is sutiable for cutting pipes under high performance conditions because the teeth are side cutting.

Professional Tools in Toolon

TOOLON Company

Our company is a self import and export company. And in all areas of the tool has its own factory, as well as suppliers. We have the domestic high-end technical personnel, management personnel, sales staff and after-sales service personnel. We have advanced production equipment, good raw material suppliers. Each of our products before export, inspection in the designated production steps, such as defective direct destruction.

Fully automatic stamping equipment

The first step in the production of products, the original material to the factory after stamping, according to the product model for stamping.

Fully automatic production equipment

Fully automatic operation, make the product more precise, more in line with the requirements of the guests!

How to pack

We each piece of the blade surface to rust treatment (rub anti rust oil, paint, surface plating a variety of titanium, chromium, zinc and other metals). When the product is packed, each of our employees with gloves for packaging, and the final inspection, to ensure that the product quality into the box in good condition. There are many kinds of packing in our packing. Including blister, plastic bags, paper boxes, plastic boxes, etc., if you want other types of packaging, please contact our staff!

Anti rust treatment

Rub anti rust oil
To carry out the treatment of anti rust paint
Surface plating all kinds of metal

Packing

1 around the leather ring: prevent the knife head broken
2 various packaging models
Blister (double Blister Blister card, single, double blister sealing, single blister skin)
plastic bag
Carton, color box
Card
The plastic box
3 in the box or inside the box

After packing

We put packed finished product put on clean, dry and rain can not enter into the environment, the products packed in a customized carton, packing operation and put the complete package of products as well as the carton on the tray. If guests have special requirements, wooden case for export in the requirements of the guests, we will custom with the guest specified size wooden box is exported, and entrusted the whole transported to the guest's designated place so far under the request of the guests, the whole supporting exports, we will find can export tray, which can then be playing supporting exports, and entrusted the whole transported to the guest's designated place so far.

Export mode

We are delivered to the designated port or airport immediately after the product is produced. Can also be exported by way of express delivery.