Bituminous Flashin Tape for Waterproofing

Specifications

 DESCRIPTION

 self adhesive bitumen tape for waterproofing is a self-adhesive, aluminum or high density polyethylene surfaced bitumen & SBS rubber backed sealing strip. It is a quick, efficient and cost effective method of flashing, sealing and repair that produces a lasting protection in all climates.

FEATURES

* Provides an instant seal

* Easily applied by hand pressure only

* Safe application , no pollution

* Available in wide range of widths, thickness, colors     

USAGE

* Replacement or repair of flashing    
* Guttering, down pipes, skylights
* Extensions, porches, window frames

& chimneys, jointing for artificial grass
* Caravans & Conservatories
* Sealing parapets, valley gutters
* Seals capping bolts & roof ridges
* Roof repair of portable buildings

APPLICATION

The application temperature should be between 5°C to 45°C. The installation procedures are to be as follows:

lTECHNICAL DATA

lPACKING

Available in 50 mm,75 mm,100 mm,150 mm,200 mm,225 mm,250 mm,300 mm rolls of

2.5 m,3.0 m, 5.0 m,1 0m,20 m length

Special sizes made to order

lSTORAGE

Store under cover, out of direct sunlight and protect from extreme temperature. In tropical climates the product must be stored in an air-condition environment. Shelf life is up to 12 months when stored as per recommended storage condition.

lHEALTH & SAFETY

As with all bitumen products caution should always be exercised. Protective clothing such as gloves and goggles should be worn. Treat any splashes to the skin or eyes with fresh water immediately. Should any of the product be accidentally swallowed, do not induce vomiting, but call for medical assistance immediately.