Polymer PP And PE Waterproof Membrane

Specifications

Polythene And Polypropylene Waterproof Membraneis suitabel for the waterproofing .dampproofing and leakproofing or roofs.basemen

Polymer PP and PE Waterproof Membrane

 

Product Introduction:

 

The polymer PP/PE waterproof membrane is made by multiple-ply different materials, especially its aging and weathering resistance layer enables the membrane possess more longer effective age. It can bond with many kinds of adhesion, firm and secure. In case of cement-base, cementitious agent can be used, the cementitious agent can easily enter into the non-woven felt layer, and form well-combination with cement after solidification, permanent durability.

Decorations can be done directly on the installed membrane layer by ceramic tiles, mosaic and etc, even on the wet screed-coat. You can carry out the construction to bond the above waterproof membrane.

 

Product Features:

l   Non-toxic, tasteless, and environment friendly

l   Good aging resistant, anti-oxidation, anti-corrosion

l   Excellent flexibility, high tensile strength, anti-puncture and rooting resistance

l   Can be carried out construction in wet screed-coat, saving constructing time

l   Easy and fast installation

 

Application:

 Polyethylene and Polypropylene (polyester) fiber polymer waterproof membrane is widely used on the roofs of civil buildings, basements, ponds, kitchens, toilets, tunnels, channels, culverts, and metallurgy and chemical fields.

 

 Technical Specification:

Type	Waterproof   Membrane
Material	PP   nonwoven laminated with PE film;high polymer polyethylene polypropylene   fiber.
Density	200g-1200g/sqm
Length	100m/Roll; 50M/Roll
Width	1200mm,1500mm
Thickness	0.5mm-1.5mm
Application	basements, ponds,   kitchens, toilets, tunnels
Packing	120sqm/Roll;   150sqm/roll; 60sqm/Roll; 75sqm/Roll
Loading in Container 20ft	(300g/sqm, 1.2m width,   120sqm/roll)-600 ROLLS
Colors	customized
Enclosure	None

 

Technical Data:

Tensile Strength (N/CM)	Normal temperature: >= 60   ; 60°C: >= 30
Breaking Elongation %	Normal temperature: >= 400   ; -20°C: >= 10
Tear Resistance N	>= 20
Impermeability, 30 min   no leakage	0.3Mpa
Low Temperature   Bending °C	<=-20
Heating Shrinking (mm)	Extension: >= 2; Shrink: >= 4
Heat Resistance (80°C×168h)	Tensile Strength % : >= 80   ; Keeping rate of adhesive breaking: >= 70
Alkali resistance (10%   ca (oh)2 solution, normal temperature ×168h))	Tensile Strength % : >= 80   ; Keeping rate of adhesive breaking: >= 80
Synthetic aging	Tensile Strength % : >=80   ; Keeping rate of adhesive breaking: >=

 

COLOUR AS REQUEST.