Home > Construction & Decoration > Geosynthetics Products > Geomembrane > APP Waterproof Membrane With Colored Mineral

APP Waterproof Membrane With Colored Mineral

APP Waterproof Membrane With Colored Mineral thumbnail-1
APP Waterproof Membrane With Colored Mineral photo-1
US$ 10 - 20 MOQ: 500 Rolls
Key Specifications
Get Latest Price
Place of Origin:
China
Brand Name:
HUIYUAN or other
Contact Supplier Request Quote Chat Now
Shandong Huiyuan Building Materials Group Co., Ltd.
Payment & Shipping
Payment Methods:
Port of Shipment:
qingdao
Delivery Detail:
Delivery time depends on order quantity.

Related Products

  • Product Details

  • Company Profile
  • Contact Us
Place of Origin China
Brand Name HUIYUAN or other

This kind of waterproof coiled material is made in the following way: base materials are firstly dipped into asphalt or thermoplastic elastomer (e.g. SBS), thermoplastics (e.g. APP or APAO) and modifiedasphalt; then both surfaces are coated with elastomer or plastic asphalt; fine sands and mineral grains (pieces) or polyethylene memb ranes are spread or covered on its upper surface; fine sands or polyethylene membranes are spread or covered on its lower surface.  

 It has a good waterproof performance and aging-resistant capacity.It does not drip in high temperature, nor does break in low temperature. It is easy to use in construction, with no pollution to environmentbut a long service life.  

 It is widely used in waterproof and damp-proof works of roofs, basements, bathrooms and pools of industrial and civil architectures, waterproof, damp-proof, airproof, leakage-proof works of bridges, parking lots, swimming pools, tunnels and reservoirs and maintenance works of asphalt roofs. SBS modified asphaltwaterproof coiled materialsis particularly suitable for buildings in cold regions where structure frequently changes, whereas APP modified asphaltwaterproof coiled materials is particularly suitable to buildings in hightemperature regions where there is strong solar radiation.

Construction Requirements
 Requirements toward base layer,  Base layer must be leveled, clean and dry. Water content shall be less than 9%. Adhesive bitumen primer is smeared evenlyon the surfaceof base layer firstly. Start the construction when it is dry.
 Spreading sequence direction of coiled materials
Keep the sequence from high to low, far to near at the same height;start the spreading work from lower place when at the same level. Spreading direction: when gradient slope is smaller than 3%, spread in the direction parallel with ridge; when gradient slope is 3% to15%, spread in the direction parallel with or vertical to ridge; when gradient slope is bigger than 15%, spread in the direction vertical

to ridge. 

 Treatment of lapping part
If lapped along longer lines, for single waterproof layer, thelappinglongitudinal/transverse width should not be less than 100mm; for double waterproof layers, it should not be less than 80mm.If lapped along shorter lines, for single waterproof layer, it shall not be less than 150mm; for double waterproof layer, it should not be less than 100mm. Besides,the work shall be done completely and evenly; all parts are melted or smeared; there must be some extra melted asphalt or code adhesive squeezed out to shape a strip.   

SBS MODIFIED BITUMINOUS WATERPROOFING MEMBRANE PROPERTIES INDEX

No. BASE PY G
TYPE I II I II
1 Soluble content g/m2≥ 2mm - 1300
3mm 2100
4mm 2900
2 impermeability pressure. Mpa 0.3 0.2 0.3
keeping time. min 30
3 heat resistance,°C 90 105 90 105
no slipping ,no flowing, no dripping
4 tension,N/50mm≥ longitudinal 450 800 350 500
transverse 250 300
5 fracture elongation,% longitudinal 30 40 -
transverse
6 cold flexibility,° -18 -25 -18 -25
no crack
7 tear resistance ,N≥ longitudinal 250 350 250 350
transverse 170 200
8 phytotrons accelerating ageing appearance first class
no slipping ,no flowing, no dripping
tension keeping%≥ longitudinal 80
cold flexibility ,°C -10 -20 -10 -20
no crack
note:No.1-6 are obliged to be tested.

APP MODIFIED BITUMINOUS WATERPROOFING MEMBRANE PROPERTIES INDEX

No. BASE PY G
TYPE I II I II
1 Soluble content g/m2≥ 2mm - 1300
3mm 2100
4mm 2900
2 impermeability pressure,Mpa 0.3 0.2 0.3
keeping time. min 30
3 heat resistance,°C 110 130 110 130
no slipping ,no flowing, no dripping
4 tension,N/50mm≥ longitudinal 450 800 350 500
transverse 250 300
5 fracture elongation,%≥ longitudinal 25 40 -
transverse
6 cold flexibility ,°C -5 -15 -5 -15
no crack
7 tear resistance,N≥ longitudinal 250 350 250 350
transverse 170 200
8 phytotrons accelerating ageing appearance first class
no slipping ,no flowing, no dripping
tension keeping%≥ longitudinal 80
cold flexibility,°C -3 -10 3 -10
no crack

Send Inquiry to This Supplier

Message
0/5000

Want the best price? Post an RFQ now!
Shandong Huiyuan Building Materials Group Co., Ltd.
Business Type
Manufacturer, Trading Company
Year Established
1998
Factory Size
30,000-50,000 square meters
Total Employees
201 - 300 People
Contact Supplier Request Quote Chat Now

You May Also Like

Product Categories

Related Searches

Recommended Categories

Explore top categories and find suppliers for your specific needs
Geocomposite Geocomposite
Geotextile Geotextile
Geogrid Geogrid
Geocell Geocell
Other Geosynthetics Products Other Geosynthetics Products
Geonet Geonet