Manufacturer: 3MM TORCH ON BITUMEN WATERPROOF MEMBRANES
SBS/APP TORCH ON WATERPROOF MEMBRANES
The products are made by soaking the base in bitumen, or thermoplastic elastomer(Such as styrene butadiene-SBS),or thermoplastics(Such as atactic polypropylene-APP,APAO,APAL)modified bitumen, then covering double faces with elastomer(SBS)or thermoplastics(APP,APAO,APAL)modified bitumen, and last finishing the upward face with fine sands, mineral flakes(or Grains) or polythene membrane etc. while downward face with fine sands or polythene membrane.
Features
Good ability of anti-aging, anti-alkali, resistant to high temperature. High tensile strength and elongation, which adapts to the contraction or crack of the base
non-toxicity,odourless,non-pollution and good flexibility
Application:
1, Basement and roofing of key waterproof engineering , general and civil engineering . Such as planting roof, flat roof and sloping roof.
2, Bridge , grain depot, road, granary, tunnel, park ,swimming pool, sewage purifying pool landfill and others.
3, Especially adapting to the area with strong sunshine or high temperature.
Technical property:
APP Waterproof Membrane Reinforced base |
PY |
G |
||||
Type |
I |
II |
I |
II |
||
Content of soluble substances(g/m2)≥ |
2mm |
|
1300 |
|||
3mm |
2100 |
|||||
4mm |
2900 |
|||||
Water impermeability |
Pressure (Map) |
0.3 |
0.2 |
0.3 |
||
Retention time (min) |
Impermeability within 30 min |
|||||
Heat resistance °C |
110 |
130 |
110 |
130 |
||
Tensile strength N/50mm≥ |
Longitudinal |
450 |
800 |
350 |
500 |
|
Transverse |
250 |
500 |
||||
Elongation at break %≥ |
Longitudinal |
25% |
40% |
------- |
------- |
|
Transverse | ||||||
Tear strength N≥ |
Longitudinal |
250 |
350 |
250 |
350 |
|
Transverse |
170 |
200 |
||||
Low temperature flexibility°C |
3 |
-10 |
3 |
-10 |
||
Package and transportation:
Membranes should be stored under dry and ventilated conditions.
Different types of membranes must be piled separately.
Under usual condition, storage period is one year since production date.
Membrane roll should be put vertically during transportation. It should be kept away from sunshine and rainwater.
Requirements for surroundings:
The base should be dry and clean. Do not work in the rainy or snowy day.
Do not work under heavy wind(above 5 grade)
Unsuitable for construction below 0°C
If it is rain or snow in the process of construction, protective measure to the laid membrane is must.
Send Inquiry to This Supplier
You May Also Like
-
High Adhesive, Water-proof, Anti Corrosion, Weather-resistant Asphalt Adhesive Glue Patch Cover for ConstructionNegotiableMOQ: 100 Rolls
-
1.5mm Thick UV-resistant Geomembrane High Strength Waterproof Membrane for Dam and Canal Lining BOLIUS$ 0.15 - 0.20MOQ: 10 Square Meters
-
Non-curable Rubber Paint Rubber Asphalt Waterproof Coating Made in ChinaUS$ 1.5 - 6MOQ: 500 Kilograms
-
Low Cost Waterproof Material ManufactureUS$ 1,000 - 50,000MOQ: 1 Set
-
PTFE Architectural Membrane MaterialNegotiableMOQ: 1
-
Special Compound BaseUS$ 0.12 - 0.25MOQ: 7000 Square Meters
-
PolyLock/HDPE Lock/ E Lock/ HDPE E Lock/Geomembrane Attaches HDPE GeomembranesUS$ 10 - 50MOQ: 1 Piece
-
Breathable House Wrap Membrane Roofing Waterproofing MembraneUS$ 0.42 - 0.42MOQ: 5000 Square Meters
-
<MIicroVENT> Waterproof Vent MembraneUS$ 0.1 - 3MOQ: 10000 Pieces
-
6 Meter Wide and 1mm Thick EPDM Smooth GeomembraneNegotiableMOQ: 300 Square Centimeters










