Home > Construction & Decoration > Geosynthetics Products > Geomembrane > Manufacturer: Waterproof Membranes for Roof Concrete Waterproofing

Manufacturer: Waterproof Membranes for Roof Concrete Waterproofing

Manufacturer: Waterproof Membranes for Roof Concrete Waterproofing photo-1
Manufacturer: Waterproof Membranes for Roof Concrete Waterproofing photo-2
Manufacturer: Waterproof Membranes for Roof Concrete Waterproofing photo-3
Manufacturer: Waterproof Membranes for Roof Concrete Waterproofing photo-4
Manufacturer: Waterproof Membranes for Roof Concrete Waterproofing photo-5
Manufacturer: Waterproof Membranes for Roof Concrete Waterproofing photo-6
US$ 10 - 20 MOQ: 500 Rolls
Key Specifications
Get Latest Price
Place of Origin:
Shandong, China
Brand Name:
HUIYUAN or other
Payment & Shipping
Payment Methods:
Port of Shipment:
Qingdao
Delivery Detail:
Delivery time depends on order quantity.
Place of Origin Shandong, China
Brand Name HUIYUAN or other

 

SBS/APP modified bitumen waterproof membrane
1.Thickness:2/3/4mm
2.Base:PY/G
3.Cover:PE/S/M/Al

 

[Construction Points]
Construction methods——hot melt, cold and hot adhering methods could be adopted to adhere sheets and substrates, or different sheets. While constructed with hot melt method, the thickness of membrane must be over 3mm; if constructed with cold adhering method, the thickness of cold adhesive must be 0.5~1mm.
Substrate preparation——waterproofing substrates shall be flat, solid, and be dried sufficiently. Detail structures shall meet requirements of related stipulations and designs.
Waterproofing layer——there are two kinds of structures of laminated and single layers, for laminated layers, thickness of each layer shall be not lower than 3mm, with complete adhesion between each other; for single layer, thickness of the single layer shall not be lower than 4mm.
Overlapping——overlapping between sheets shall be completely adhered, with 80-100mm width of jointed area.
Vertical surface ends——fasten with metal battens and bolts, coat special sealant in all edges.
Protection isolation layer construction——protection isolation layer shall be set on the exterior surface of waterproof layers according to related stipulations and designs, if use shale sheets or mineral grain coating surfaces as exposed waterproof layers, additional protective layer could be omitted; isolation layers shall be set between waterproof layers and rigid protective layers.
 
[Attentions for Construction]
·Construction shall not be carried out in rain, snow or over 5 degree wind weather;
·There shall be sufficient safety protective facilities in construction site, place firefighting devices according to stipulations.

Installation Sketch point
 Clean the substrate using broom or high pressure dusty cleaner.
Apply primer
Heat the membrane bottom using a high temperature flame gun.
Push forward while the primer and membrane oil melted
 Use a roller to push hard the membrane surface to ensure it stick firmly
 
 manufacturer: waterproof membranes for roof concrete waterproofingmanufacturer: waterproof membranes for roof concrete waterproofingmanufacturer: waterproof membranes for roof concrete waterproofingmanufacturer: waterproof membranes for roof concrete waterproofingmanufacturer: waterproof membranes for roof concrete waterproofing
 

Technical data Confirming to GB18242-2008

No. Item I II
PY G PY G PYG
1 Soluble content/(g/m2)≥ 3mm 2100  
4mm 2900  
5mm 3500
Test   No flame   No flame  
2 Heat resistance °C 90 105
≤mm 2
Test No flow, no dripping
3 Low temperature flexibility/°C -20 -25
No crack
4 Impermeability 30minutes 0.3MPa 0.2MPa 0.3MPa
5 Tension Maximum/(N/50mm) 500 350 800 500 900
Secondly-Maximum         800
Test No crack, no apart
6 Elongation Maximum/%≥ 30   40    
Secondly-Maximum≥     15
7 Oil Leaking Pieces≤ 2

 

1. Usage:

It is widely used in waterproof and damp-proof works of roofs, basements, bathrooms and pools of industrial and civil architectures, waterproof, damp-proof, airproof, leakage-proof works of bridges, parking lots, swimming pools, tunnels and reservoirs and maintenance works of asphalt roofs.

2. SBS modified asphalt waterproof coiled materialsis particularly suitable for buildings in cold regions where structure frequently changes.

3. APP modified asphaltwaterproof coiled materials is particularly suitable to buildings in hightemperature regions where there is strong solar radiation.

 

Product Introduction 

 

APP uses polyester, glass fiber felt or Gf-upglassfiber polyester as the base, coated the polymer modified bitumen, such as APP, APAO, APO, IPP, etc. and covered polyethylene film, sands or mineral grain.

 

 

 

Where to use

 

1.Basement and roofing of key waterproof engineering, general and civil engineering.

 

2.Bridge, road, granary, tunnel, park, swimming pool, sewage purifying pool and others.

 

3.Especially adapting to the area with strong sunshine or high temperature.

 

 

 

Features

 

Good ability of anti-aging, anti-alkali, resistant to high temperature. High tensile strength and enlongation, which adapts to the contraction or crack of the base.

 

Application:

 

1. Make sure the base surface smooth, clean and dry(Moisture<9%), then paint the delicated agent on the base surface. Start application till it is dry.

 

2. Application Method:

 

Heating the bottom surface of membrane and the roof deck surface by flam spray gun or other suitable appliances till the asphalt start to melt(not flowing), then spread. Using roller to compact the membrane so that it can firmly adhere to the base surface. The overlap on the long side should be 100mm and the short side should be 150mm.

 

3. After application, a careful inspection is required. Make sure there is no air bubble, no fold, no falling away etc to guarantee the waterproof life.

 

 

 

Storage

 

1.Store the product in adry ventilated place with the temperature lower than 50'c; avoid sun-baked and  wringing.

 

2. Put uprightly and the height can not exceed than 2 layers. Do not incline or put transversely .

 

3.Guarantee period is one year since the date of manufacturing.

 

manufacturer: waterproof membranes for roof concrete waterproofingmanufacturer: waterproof membranes for roof concrete waterproofing

 manufacturer: waterproof membranes for roof concrete waterproofingmanufacturer: waterproof membranes for roof concrete waterproofingmanufacturer: waterproof membranes for roof concrete waterproofingmanufacturer: waterproof membranes for roof concrete waterproofingmanufacturer: waterproof membranes for roof concrete waterproofingmanufacturer: waterproof membranes for roof concrete waterproofing

 

 

Send Inquiry to This Supplier

Message
0/5000

Want the best price? Post an RFQ now!
Business Type
Manufacturer, Trading Company
Year Established
1998
Factory Size
30,000-50,000 square meters
Total Employees
201 - 300 People

Recommended Categories

Explore top categories and find suppliers for your specific needs