H.264 Big Battery Camera DVR module camera

H.264 Big Battery Camera DVR

Operation instruction

1.TF card insertion:Insert a TF card to the slot, max 32GB. Plz kindly note that this device needs good quality TF card. Bad ones may ruin it. Plz contact us  if you need high speed TF card.

2. Power on: Plz turn the ON/OFF button to ON. Plz kindly note that it will be forced to shut down when turn to OFF button under any circumstances.

3.Turning on: Press button A on the remote control and the indicator on. It will flash 5 times and turn steady before go to standby mood.

4.Taking video: Press operation button B on the remote control when this device is in standby mood. The indicator will flash 5 times and turn off, which indicates video mood. Press B if you want stop. And indicator will be on, meaning standby mood.

5.Taking picture: Press mode button C to change to picture mood. The indicator will flash one time and become steady. Then press operation button B to take a picture. The indicator will flash one time and become steady, indicating a picture is taken. Image resolution: 4032 * 3024

6.Taking audio: Press mode button C to change to audio mood. The indicator will flash three times and become steady. Then press operation button B to take audio. The indicator will flash all the time. Press button B if you want to stop. And indicator will be on, meaning standby mood.

7.Motion detection: Press button A in standby mood. The indictor will flash 5 times and become off, meaning motion detection mood. It saves files every 10 min. Press button B if you want to stop. And indicator will be on, meaning standby mood.

8.Connecting to PC: connect the device with USB cable in standby mood.

9.Video resolution setting: There are 3 kinds of video resolution for choosing: 1920* 1280,   1280 * 720,  320 * 240.

Edit a text file. It will be set to 1920* 1280, if the text content is “1”,  1280 * 720 in “2” and 320 * 240 in “3”. Save the text file as “any name is ok”. Delete all the files after connect it to the PC. Copy this text to the device and reset it. That is how to set video resolution.