QAC based hard surface disinfectant

Specifications

Product Concentrate for Manufacturers or Professionals
Final Product is of Great Performance
Prestigious Product

QAC Based Hard Surface Disinfectant

 

 

Properties: QAC (quaternium ammonium compound) based hard surface disinfectant, which is used to disinfect all hard surfaces, machinery and equipment, benches, floor or walls. Effective against gram + and gram – bacterias, fungus and yeast. Leaves approximately 1,000 ppm of disinfectant layer on the surfaces applied, which keeps hygienic level at maximum for long periods. No rinsing is necessary after use except for those surface or materials to be in contact with food. No thickening agent is added. No fragrance added. Highly dilution rate provides a very economic use. 

 

Directions for Use: Dilution Rate: Standard application: 1/100 (100 times, i.e. 100 gr/ 10 L of water).             Retardation process: 1/500. FB 181 is applied only on clean surfaces to make sure that the product to have enough contact with each point on the material, so that disinfection is provided throughout properly. So, surfaces are cleaned and properly rinsed before application. FB 181 solution is prepared according to 1/100 of dliution rate. Then, the solution is applied by using a spraying unit or spread by mopping or wiping to make sure that all the surfaces are wetted. No rinsing is necessary. It is strongly advised that the surfaces should be left as they are until drying completely. 

 

pH Value: 3.5 – 4.5.