Stone Series Wall Mounted Sauna Heater

Cirrus

Cirrus has an amazingly even heat distribution from the floor up to the ceiling. Water thrown on the heater will be transformed to pleasant steam from the uniquely designed soap stones with water pockets. Available as 3 kW, 4 kW and 5 kW.

Type

There are two types of Cirrus sauna heater: built-in control paner(left) and separate control panel(right).

Built-in type

THERMOSTAT

Adjust the temperature of the sauna by simply turning the operating knob. Thermostat support automatically the choosen temperature.

In case the heater overheats, the safety sensor will automatically stop the heater even if the timer is on. Find out for what reason the heater overheated. The reason for this could be too tightly placed sauna stones, heater´s location or inappropriate ventilation. If this occurs, find out the cause and fix the problem before resetting the safety sensor. The reset button is
located below the temperature knob.

TIMER

The timer has 1-8 (white) hours presetting time and 1-4 (pink) hours operating time.
To start the heater at once, turn the knob to anywhere between 1-4 on the operating time scale. The heater will start and remain on for the time selected.
To preset the timer, simply turn the knob to anywhere between 1-8. When the specific number of hours is reached, the heater will start running and stay on for up to 4 hours if you don´t turn it off earlier.

Separate type

The control must be purchased separately.

There are two control panels for option:

Innova Classic separate control unit with 15kW capacity has LED display and seven buttons for easy usage. It has features like door sensor function and timers as well as smart energy saving and even power distribution.

Innova Classic separate control unit comes with temperature sensor and over-heat protection fuse with holder and 4m silicon connection cable. The package includes a power controller and a separate control panel and the two are connected with a cable.

The Innova built-in control unit is a power controller and a control panel in one slim enclosure. The Innova Classic Built-in has all the same features than the separate model.

It has 15kW capacity and features like door sensor function, timers as well as smart energy saving and even power distribution.

Innova Classic control unit comes with temperature sensor and over-heat protection fuse with holder and 4m silicon connection cable.

Cirrus – Technical Data

Cirrus – Minimum Safety Distances (mm)

FAQ:

1.  Can an electric heater cause electric shock?

Electric heaters are safe to use when installed correctly. That is why a qualified electrician must do the installation. All our heaters are tested before delivery and have passed the electrical safety standards.

2.  Why are sauna heater rocks important?

Sauna rocks store heat from the sauna heater. When the bather throws water onto the hot rocks, the steam will blend with the dry air in the room, giving the bather an enjoyable and relaxing atmosphere. Never use the heater without stones, it may cause a fire. Use only stones that are recommended by the sauna heater manufacturer.

3.  Can I throw any kind of water onto the sauna heater rocks?

No. You can only use water that is suitable for household use. Do not use chlorinated water as used in swimming pools or hot tubs as it will corrode your heater