PT-20 LED light curing machine

Specifications

LED light curing machine
High power LED,purely dental blue light
Digital display, adjustable work time

PT-20 LED light curing machine

General Introduction:

This LED light curing machine with adjustable working hours. Working time visual, curing efficienct higher characteristic. The light-curing machine equipped with charging status recognized by charging stands (charging: the indicator light, charging end: LED BAA, left: LED shining host), this light-curing machine at work, every 5 seconds buzzer "di" tone, while at the same time shows the time remaining on the display, non-work time, 120s without any key is pressed, the light-curing machine automatically shut down to conserve battery power, shut down state, press any key to boot.

1 FUNCTION KEYS

ON/OFF button:

1Turn on or turn off the LED blue-ray output

2Can make the machine run

TIME button:1 you can set the working time (10s 20s 30s 40s )

2 Can make the machine run

 

II Technical parameter                                 

Charger input---------------------------110V—240VAC 50—60Hz

The charger output---------------------DC5V  1000mA

Lithium battery voltage----------------DC4.2V

Lithium battery capacity---------------2000mAh

Output optical wavelength-------------420—480nm

Output light intensity-------------------1200—1400mw/cm²