Non-asbestos high temp calcium silicate heat insulation block

Specifications

Non-asbestos high-temp calcium silicate heat insulation board
Good durability
Low thermal conductivity
High strength

Non-asbestos high-temp calcium silicate heat insulation board is mixed with Xonotlite and renforced glass fibre with high service temp.(1050),good heat insulation, low bulk density, high strength, good durability and so on.

Product characteristics:

> good durability, can bear high temperature  within the limit of continuous heat load,

> low thermal conductivity, in the whole range are used with unmatched adiabatic performance.

> light weight, high strength. It is the highest in these hard thermal insulation products.

>better durability, use for a long time without powder.

>construction with ordinary carpenter applicability, tools can be optional cut products.

> used safety, hygiene. Excluding asbestos, sulfur, chlorine such poisonous substances.

> fear water, but after drying also can be used.

 HCS physical performance index

Items	Unit	HCS-170	HCS-220	HCS-270
Bulk density	Kg/m3	170±10%	220±10%	270±10%
Pressure strength	MPa	≥0.40	≥0.50	≥0.60
Flexural strength	MPa	≥0.30	≥0.35	≥0.40
Thermal conductive	W/m.k	≤0.048 +0.00011t	≤0.050 +0.00011t	≤0.056 +0.00011t
Temp.limit		1000	1050	1050
Linear shrinkage	%	≤1.50 (1000,3hrs)	≤1.50 (1000,3hrs)	≤1.50 (1000,3hrs)

We also supply limit 850 degree products.

Block Sizes and Dimensional Tolerances

Length±3mm	Width±3mm	thickness+2mm,1.5mm
610	303,300,150	25140
600	300	25140
400	250	25140
1000	500	25140
1200	600	25140

We also can supply special size and type.