Power source ; 110-130V/AC  220V-240V/AC

Rated Load:  Max 1200

Detection Distance:  2~8m or 2-16m  (Optional)

Welcome to read our ES-P25 New 3 detectors 360 Degree PIR Motion Movement Sensor Detector body switch light switch !

         The product adopts good sensitivity detector, integrated circuit. SMT. It gathers automatism, convenience, safety, saving-energy and practicality functions. The wide detection field is consisting of detectors. It works by receiving human motion infrared rays. When one enters the detection field, it can start the load at once and identify automatically day and night; its installation is very convenient and its using is very wide. It has functions of power indication and the detection indication.

SPECIFICATION:

FUNCTION:

• Can identify day and night: The consumer can adjust work ambient light. It can work in the daytime and at night when it is adjusted on the “sun” position (max). It can work in the ambient light less than 3LUX when it is adjusted on the “moon” position (min). As for the adjustment pattern, please refer to the testing pattern.
• Time-Delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the basic of the first time-delay rest.
• Time–Delay is adjustable. It can be set according to the consumer’s desire. The minimum time is 10sec±3sec. The maximum is 7min±2min.

TEST:

• Turn the LUX knob clockwise on the maximum (sun), turn the TIME knob anti-clockwise on the minimum.

   

•  When you switch on the power, the controlled load is not working. Preheat 30 seconds later, when the sensor gets the induction signal, the load will be turned on. After the load is turned off, it will be turned on again when the sensor gets induction signal within 5~15 sec.

• After the first is out, make it sense again after 5~10sec. The load should work. When there is no inductor signalsin the sensor, the load should be stopped working within 5-15sec.
• Turn ambient light knob anti-clockwise on the minimum. If it is adjusted in the less than 3LUX, the inductor load should not work after load stop working. If you cover the detection window with the opaque objects (towel etc), the load work. Under no induction signal condition, the load should stop working within 5-15sec.

Detail Picture of ES-P25 New 3 detectors 360 Degree PIR Motion Movement Sensor Detector body switch light switch !