Taian Puhui Electric Technology Co., Ltd.: Shandong, China; Main products: Reflow oven, BGA Rework Station, Wave Soldering machine, IR preheater, BGA Repair Equipment

Home > Products > IR-preheating Plate > BGA Rework Station,infrared Rework Station, IR-preheating Plate T8280

BGA Rework Station,infrared Rework Station, IR-preheating Plate T8280

FOB Price

US$ 1 - 199 / Carton

1 Carton(Min. Order)

Port Qingdao
Payment TermsCredit Card

Request Sample Customized Request Request Free Catalogs

Contact Now

Get lowest price

Product Details

Place of Origin	Shandong, China	Brand Name	PUHUI
Model Number	IR-preheating plate T-8280	Voltage	AC110V/AC220V
Dimensions	39x18x49cm	Weight	8Kgs
Usage	Preheating pcb	Certification	CE

Product Description

BGA rework station,infrared rework station, IR-preheating plate T8280

Products Features:

1. Infrared welding technology which was developed independently, advanced PID intelligent temperature, controls temperature more accurate.

2. T-8280 can heat PCB board and component which contains lead or not,especially BGA and SMD parts.

3. Use infrared heat, easy to cut through, heat evenness, doesn’t have hot air flow, won’t shift the small components on the PCB board,ensure the welding quality.

4. With 1500W heating system, heating area 280x270mm. Can use with the hand-held infrared rework station T-835.

5. Easy operate; you can operate it after simple training.

6.T-8280 will satisfy soldering/unsoldering of phones, computers, notebooks, play station machines, etc.

Technical Parameter

Work bench size	410x316mm
Rated voltage and frequency	AC220-230v/AC110V 60/50Hz
Complete machine power	1600W
Preheating plate power	1500W
Preheating plate size	280x270mm
Preheating plate temperature adjustable	0-450

Main Components:

Preheating plate main body	1
Temperature sensor	1
PCB board holder	1
Power line	1
User manual (compact disc)	1

Main component function explanation

Operation instructions

1. Inspect the machine and then open it

Check the connection of the power line.

Turn on the power switch. Allow the T-8280 Power-On-Self-Test (POST) to complete. After this, Temperature set-points will display last value used.

The black switch on the front panel are used to control the infrared preheating plate; press the blue button (up),the red button(down), can adjust the infrared preheating plate temperature between 0 and 450. Press the buttonON,the infrared preheating plate starts to work, pressOFF,it stops working.

2. Operation of preheating PCB board

(1) The placement and adjustment of the PCB board

According to the size of the PCB board, adjust the PCB board holder, then put the PCB board and fix the adjust knob.

According to the size of PCB board and welding technological requirement, press the blue button (up)and the red button (down), regulate the output temperature of preheating plate between 0 and 450

(2) Preheating open and close:

Press the ON button,open the preheating plate about 3-5 minutes, make the temperature be the setting value then carry on the next step .

Finishing, press OFF, the preheating plate stops working.

AttentionDont close the power switch until the machine full cooling.

The preheating temperature set: If the PCB board contains lead, adjust the infrared preheating plate temperature to 100-120; if not, adjust to 120-140. You can also set the preheating temperature according to the users experience and technology.

3. Machine installation and adjustment:

The preheating plate heating type includes: the total pressure flow-through heating way and the PID percentage adjustment way. You can adjust it according to the preheating allowance. Generally speaking, if the preheating temperature is lower than 250 , selects the PID percentage adjustment method; and if the preheating temperature is higher than 250, use the total pressure flow-through heating way.

Adjustment method

1. Press power-on, display: C=?

2. Press choose 0 or 1,every press the status change one time,

C=0 is PID percentage adjustment, C=1 is switching control.

Cautions!

1. After finishing, dont turn off the power immediately; make sure the infrared preheating plate complete cooling.

2. Keep the ventilation free-flowing, the infrared preheating plate clean, use dehydrated alcohol clean it regularly!

3. The high temperature operation, pay attention, avoid scalding.

4. If you dont use the machine for a long time, youd better pull off the power source plug!

Warranty

The whole machine maintains for one year and the spare parts maintains for three months. .Provides the immediate network online Q/A and the technical advisory work service.

Statement

If there is any difference between users operating manual and actual product, according to the actual product!

12 months warranty & Factory price

For more details, pls feel free to contact us, thank you

Skype Jayzhang223 QQ 1922214215

Contact Us

Taian Puhui Electric Technology Co., Ltd.: Contact nameKelly Zhang
Chat Now; Phone86-538-6138575; AddressSouth Sec. Of Tianzhufeng Road

*Email
Please enter Your valid email address.
*To

Kelly Zhang
*Message
Your inquiry content must be between 20 to 5000 characters.
Please enter a correct verification code.

Product Categories

BGA equipment	BGA repair tools	BGA Rework Station	Desktop reflow oven
Infrared IC Heater	Infrared Reflow Oven	Infrared Soldering machine	IR-preheating Plate
LED reflow oven	New Products	Reflow oven	Reflow soldering machine
Solder paste printer	Wave soldering machine

BGA Rework Station,infrared Rework Station, IR-preheating Plate T8280

You May Like

Product Details

Product Description

Contact Us

Product Categories

New Products

Popular Searches

Recommended Products

Find Similar Products By Category