Distillate used oil sludges greaves recycling to diesel refining machine

      Distillate  used oil sludges greaves recycling to diesel refining machine

Work flow:

Put the crude oil into the pyrolysis reactor by oil pump, catalytic heating reactor at normal pressure, the distillate oil gas through catalytic chamber into the condenser. After cooling, the oil gas convert into the diesel oil and through the gas system the non-liquefied part get into heating system

Raw materials:

Technical characteristics of waste oil recycling technology:

1. Catalytic pyrolysis under atmosphere pressure and chemical extraction technology.

2. Perfect environmental protection, such as gas flare and flue desulfurization dedusting

    system.

3. Simple chemical solution to clean the color and peculiar smell of the product.

4. Oil yield rate≥98%.

5. Reasonable design, advanced manufacturing engineering, high percentage of automation,             complete safe installation.

6. Broad-spectrum.

7. After distillation you can obtain the diesel and the heavy oil.

Main parts of oil distillation machine:

The machine is consist of four main parts, which are distillate tank, energy recycling

system( pre-heating tank), cooling tank and wine storage tank.

Advantages of waste oil purifier machine:

1. Low cost, cost is 30$ for refine one tons used motor oil.

2. Easy to operate,low operation cost, only 1-2 workers can control the machine.

3. The machine can recycle gasoline motor oil, diesel motor oil, all kinds of engine oil,

    and other lubricant oil to clean oil.

4. Environmental friendly. This machine is full enclosed, there is no any harmful smell

    come out form the machine, colloid, oxid, acid, pitch will be converted to oil sludge,

    can be use as bitumen and fuel.

5. 85% high recycling rate. This includes 3-10% diesel and gasoline mixture, 85-95%

    base oil and 2-5% oil sludge.

6. Efficient vacuum systems

7. High quality refined oil, no any discoloration caused by oxidation, no any bad smelling.

Installation & Commission of oil distillation machine

1) Foundation drawings will be provided after making the order.

2) Engineers provided overseas installation and commissioning.

3) Trainings and other essential basic instructions will be provided.

Tips for You in Setting Up the oil distillation machine

1) 120 square meters is enough for the equipment itself.

2) Installation site suggest in outdoors with good ventilation and safety facilities.

After-sale service

1) We will send engineer to your site to install machine, train your workers and do

    commissioning.

2) We offer one year warranty for our products.