Electric blower 2RB 530 V35

Application:

1. Drying out buildings - Ventilating/drying out buildings after flood
2. Dental vacuum
3. Filling Bags and bottles
4. Filling Silos
5. Fishpond/breeding pond ventilation - Enriching water with oxygen
6. Food processing - Degasification
7. Gas analysis
8. Industrial vacuum cleaners, central extraction systems
9. Lifting and holding parts using vacuum suction
10. Laser printers - Powder dusting and extraction
11. Letter sorting, enveloping
12. Packaging Machines
13. Paper Industry - Sheet separation, turning, transport, fixation and drying
14. Pneumatic Conveying
15. Soil Treatment - Extracting ground level air
16. Swimming pool technology/spas - Blowing air into water tanks
17. Textile machines - Extracting waste thread and fluff
18. Thermoforming
19. Ventilation of sewage treatment plants - Enriching water with oxygen

Certification:

      The gas is taken in through the inlet 1. The impeller 3 impacts the gas in the direction of rotation when gas enters the side channel 2. Meantime, centrifugal force in the rotating impeller accelerates the gas outwardly, and pressure increases. As the impellers go on rotating, the kinetic energy of the gas increases, resulting in further increasing of air pressure along the side channel. The side channel becomes narrower at outlet, and the compressed gas is swept out of the impeller and discharged out of the side channel blower.

Voltage Overview:

Three-phase:

Fixed voltages incl.ATEX        +10%

Voltage range                +5%

In compliance with UL and CSA  10%/+6%

Single-phase:

Fix voltages:                 +5%

If during continuous operation only 90% of the maximum end pressure is used, the admissible tolerance increases to +/-10%. Incompliance with UL and CSA 10%/6% (UL 507u.CSA 22.2 No.113)

Frequency:                  +-2%

The motors comply with the IEC and European norms quoted. The European norms replace the national norm of the following member states: Germany (VDE), France (NFC), Belgium (NBNC), Great Britain (BS), Italy (CEI), Nether-lands(NEN), Sweden(SS), Switzerland (SEV) and others.

The machines also comply with various national norms.

The following norms have been adapted to the publications IEC 60 034-1 and the motors can be used at standard rated performance.

UL 507              USA

CS A22.2, No113      Canada

IS  325             India

IS  4722

Nek_IEC 60034-1      Norway

We have plenty of product, and they are available for your requirements anytime:

Packaging: