Truck Crane/mobile Crane/crane
Specifications
Crane/truck crane takes WD Deutz engine, streamline cabin,6x4 drive.
The QY12D431 truck crane, which is developed independently to adapt to the market demands, is a new-generation and high-performance product integrating our company many years manufacturing experience with advanced technologies. Its performances such as lifting height, boom length, working speed and lifting capacity have achieved advanced international level.
The truck crane, with spacious cabandcompact decoration, adopts full slewing system, 4-section telescopic boom sections, unique manual proportional control system and self-made semi-width special purpose chassis with three axles. 6×4 drive provides the crane with good driving performance and flexible steering. The engine complies with the National Stage III emission standard.
The system with latest load feedback hydraulic operated proportional directional control valve and quadruple gear pump, and the safety devices fitted in hydraulic system, such as relief valve, balance valve, hydraulic lock and brake valve etc., prevents the oil line from overloading and the accidents caused by oil pipe breakage and makes full use of the working capacity of each actuating mechanism. Thus the reliability and safety of the crane are increased.
Item | Value | Remarks | ||
Working performance specification | Max. rated total lifting capacity kg | 12000 |
| |
Max. load moment of basic boom kN.m | 465.5 |
| ||
Max. load moment with max. main boom length kN.m | 258.7 |
| ||
Max. lifting height of main boom m | 29.8 | Deformation of boom is not taken into consideration. | ||
Max. lifting height of fly jib m | 35.8 | |||
Working speed | Max. speed of single rope on main winch m/min | 98 | The 4th layer of drum | |
Max. speed of single rope onauxiliary winch m/min | 87 |
| ||
Telescopic time of boom s | 53.5 |
| ||
Derricking time of boom s | 38 |
| ||
Slewing speed r/min | 0~3 |
| ||
Traveling specification | Max. traveling speed km/h | 78 |
| |
Max. gradeability % | 27.5 |
| ||
Min. turning circle diameter m | 18 |
| ||
Min. ground clearance mm | 260 |
| ||
Limits for exhaust pollutants and smoke | Comply with related standards | GB3847-2005 GB17691-2005 (Stage III) | ||
Oil consumption per hundred kilometers L | 28 |
| ||
Mass specification | Deadweight of crane in traveling condition kg | 18030 |
| |
Complete vehicle kerb mass kg | 17900 |
| ||
Front axle load kg | 5120 |
| ||
Rear axle load kg | 12910 |
| ||
Dimension specification | Overall dimensions(L×W×H)mm | 11000×2500×3180 |
| |
Base on outriggers m | 4.63 |
| ||
Distance between outriggers m | 5.2 |
| ||
Main boom length m | 9.2~29.4 |
| ||
Main boom angle ° | -2∼80 |
| ||
Fly jib length m | 6 |
| ||
Offset angle of fly jib ° | 0 |
| ||
Chassis | Model | ZLJ5241 |
| |
Class | II |
| ||
Engine | Model | WP6.210 |
| |
Rated power kW/r/min | 155/2300 |
| ||
Max. output torque N.m/r/min | 750 /1400~1500 |
| ||
Manufacturer | Changsha Zoomlion | |||
Send Inquiry to This Supplier
You May Also Like
-
2T Hydraulic Truck CraneUS$ 5,000 - 10,000MOQ: 1 Set
-
ZOOMLION 12 Ton Small Mobile Truck Crane QY12 With High QualityUS$ 1 - 5,000MOQ: 1 Unit
-
650ton Cheap Crawler Crane With High QualityUS$ 1 - 999MOQ: 1 Piece
-
4 Wires AC Carbon Steel CNC Laser Cutting Equipment , Small Laser Cutting MachineUS$ 86750 - 94250MOQ: 1 Unit
-
ZLP 630 Aluminum Alloy Suspended Gondola Swing Stage Scaffold With Single RackNegotiableMOQ: 1 Unit
-
Refrigeration / Heat Exchange Equipment CNC Machining Services With Copper BronzeNegotiableMOQ: 1 Unit
-
Turning , Milling , Drilling Aluminum Machining For Testing Equipment , AutomotiveNegotiableMOQ: 1 Unit
-
Truck Mounted CraneNegotiableMOQ: 1 Set
-
8-16 Tons Truck CraneNegotiableMOQ: 2 Units
-
Grease Pump for Used Sumitomo Truck CraneUS$ 45 - 350MOQ: 1 Piece