Highly Efficient Valve Type Auto Packing Machine Available at Best Rate

• Pneumatic Type feeding
  
• Automatic Overfill compensation
  
• Adjustable coarse and fine feed rate and quality
  
• Micro computer controlled
  
• Pneumatic type bag Clamp
  
• Maximum output 400 bags per hour
  
• Filling capacity 10/50 KG (rated for 25 and 50 kg bags only)
  
• For Smaller Bags Output Will Reduce

Grain Size Composition
Max size of in-feed material graduated send size’s from 5mm, 3mm, 2mm. Minimum bag mouth opening size to be 65mm.

• Packing Capacity: 400 bags per hour
  
• Machine will be complete in all respects, factory assembled and ready for installation under feed hopper.

Grain Size Composition
Max size of in-feed material graduated send size’s from 5mm, 3mm, 2mm. Minimum bag mouth opening size to be 65mm.

• Filling assembly mounted on structure
  
• Electronic weighing system
  

Control board
Compressed air requirement is 500 LPM at 7 kg/cm and is to be arranged by customer.

Technical Specification for Stationery Packer

• Equipment: stationery packer
  
• Material handled: dry mortars
  
• Bulk density of material: 0.8 - 1.2 T/m
  
• Max grain size: 5 mm max (samples will be sent to you 100 gms each)
  
• Filling capacity/unit bag: 25 kg/50 kg
  
• Filing range: 10-50 Kgs. Min. Nozzle size for bag will be 65mm
  
• Output per hour: 400 kgs/hour (only 25 and 50 kgs bags)
  
• Provided size of bag is uniform & big enough & operator is efficient & trained
  
• Weighing system: electronic load cell
  
• Accuracy: After starting the Packer, Electronic Indicator automatically adjust itself within 5
• to 7 Bags then accuracy will be 50 kg +/- 250 grams for an average of 20 consecutive
• weighments, provided bag size is as per ISI & uniform with sufficient perforations & proper valve size.
  
• Temperature of product: 50 to 60 C
  
• Power requirement: 440 V A.C. three phase @50 Hz
  
• Air requirement: 400 lpm at 7 kg/cm (single spout)

Scope Of Supply
Stationery Packer

• Main Frame Assembly
  
• Suspension frame with 2 filling spouts
  
• Filling assembly with casting and belt
  
• Electronic load cell arrangement
  
• Electrical panel box
  
• Pneumatic panel box
  
• Air cylinders
  
• FRL, pressure regulators & pressure gauge
  
• Pneumatically controlled slide gate x 2 Nos, with 3 positions air cylinder
  
• Adjustable bag rest
  
• Solenoid valves & fittings (janatics make)
  
• Bag holders with air cylinder

Major Electrical Components Stationery Packer

• Electronic microprocessor based control unit
  
• Electronic microprocessor based control unit
  
• Push button station
  
• Load Cell of 110 / 225 kg capacity
  
• Indicator Lamps
  
• S.M.P.S. (regulated power supply) for each electric panel
  
• MCB, electrical contactors, MPCB etc
  
• Microprocessor paper type