2015 Large power poster welding machine for banner

Large power poster welding machine for banner

(yinghe model 3000LC)

Technical data

Application

Welding and joining separate pieces made of some hot melting materials, such as PVC fabric, PE canvas, outdoor poster banner, textilene, plastic pieces, and so on. It is also used to laminate and hem the margin in edge-works of the pieces

Operation steps

1.Make the picture smooth and tight,take jointer to accurate (about 2-4cm), fixed edges with tape or glue on the ground

2. Open the power, turning handle to left to keep hot air nozzle and the rubber tire is on the straight line.Then turn the right black knob to adjust the speed, generally marked on the knob points to the location between 2 from 4.After setup, turning the handle to right until the hot air out of the ground

3. Set the temperature degree.And turn the golden knob until it clicks and then follow the button to the end. Set the desired temperature according to thickness of picture . Generally, the temperature is between 300-350°C

4. In the welding process,if printing material is burnt, the first thing to slow down the speed or low the temperature,This can avoid to  burnt picture material,but do not increase speed rapidly, otherwise the machine will  run too fast to make it go straightly,this will cause the picture can not be spliced and damage the picture.

5. Before using ,please find the proper temperature and speed according to your printing material. Therefore, it is very important that the temperature and speed are good match

6. After welding ,turning the handle to right to keep hot air gun from picture competly,then turn off the temperature switch.No luging the power cord and turning the power off directly ,to avoid heat damage to the hot air gun

7. Don’t use it in rainy day,the workplace should be dry, flat and safety of fire.The machine should have technical person to oprate, it is forbid that someone use it without specific knowleage

Also we send machine to customer ,we will provide extra heater part to customer

Why Choose my company ?

1,Over 10 years of Export Experiences

2,Exports to more than 200 countries and regions since 2001

3,Professional oversea aferservice team

4,Near 10000 square meters office and showroom

5,Most of our products got the CE certification.  

Details show 

About my company

Pls feel free contact me 

You can scan my wechat code directly