bestop New Design Smart system car back fog light

bestop New Design Smart system car back fog light

        The latest developed laser fog light is through the installation of a red laser transmitter in the rear

of the vehicle to project a laser beam through air to the ground in the rain and fog weather. It is easier

to be found than the traditional fog light and the penetrating power of it is stronger. It can remind behind

vehicle to maintain a safe distance. The laser beam launch downward with a certain inclination angle, to

ensure that no direct exposure to the eyes. Open the light in the sunny weather, only to see a red line

projected on the ground, no need to worry about it will shielding the vehicle license plate. New D

ghtSpecification:

• Supply voltage: 8-30V
• Operating current:80MA-200MA
• Laser output power: 100MW/300MW
• Laser wave length:635nm±5nm
• Light angle:15°
• Working temperature:-30--70                                                                                                             

    The product will stop working while the temperature beyond 70°or below -30° to protect the laser light.

Introduction of Installation New Design Smart Car Fog Lights Laser Rear Fog Lights

    Rive the double-sided adhesive, paste the laser fog light in the top of rear license plate’s middle. Then connect the line and open fog lights, adjust the angle to make the beam project to the ground. Finally, tighten the screws.