Foundry moulding machine Z148 with jolt squeeze type

The Jolt Squeeze Moulding Machine Work principle

The worktable fall and collide with floating shock-iron,and the sand was tighted slightly, and then to compaction,get the top and bottom of sand mould are tight. The slightly shock is high frequency (500-1000 times/min), small amplitude (5-25 mm) vibration instead of low frequency (60-120 times/min), the large amplitude vibration. This kind of moulding machine made of sand mold are good quality, the basic requirement is also lower.

The machine suitable for batch production of small size molding piece single faced plate and single box mode,up box and down box be made.The machine adopt spring microseism pressing structure,pressing cylinder wide,pressing strength strong is good for molding quality,pneumatic pipe simple,easy control and convenience.

 It is fully buffered,high-frequency,low amplitude,pneumatic-type molding machine microseism 

compaction.It used a buffer spring,pneumatic microseism institutions can reduce the shock impact of the foundation.All parts of the aircraft fuselage steel,a substantial increase of steel.

The Jolt Squeeze Moulding Machine Work Technical Parameters

 with our customer:

 certificates:

About Us:

We are a successful manufacturer and foreign trade company that has a good reputation of providing our customers with the best service and online buying experience in the business. Please feel free to email us or call us . Your email

will be appreciate and we reply you as soon as possible.