ChunLei PVC Welding Equipment for Roof Geomembrane and Banner

ChunLei PVC Welding Equipment for Roof Geomembrane and Banner

(ChunLei Machine)

Product Description

The two model machine is new tape welding machine , those machine can be used for welding and joining coated fabric , PVC fabric, PE canvas, tarpaulin , outdoor banner, textile-ne, plastic pieces, inkjet cloth, light box cloth and so on

Technical data

Operation steps

1.Check the welding nozzle basic setting , and connect the tool to the mains . The mains voltage must correspond with the voltage stated on the cool

2.Perform a test welding according to the welding instructions of the material , check the test welding . Then adapt the welding temperature as required .

3.Turn hot air blower using positioning lever up to the stop , the outside edge of drive/pressure roller must lone up with the overlap edge of the material to be welded

4.Set temperature and welding speed according to the required value

5.After completing welding work , press the button , so that the hot air blower cools down . Then turn off the air blower switch

Maintenance

1. For safe and effient working , always keep the unit and its ventilation slots clean

2. Clean welding nozzle with wire brush

3. Check mains connection and plug for electrical and mechanical damage 

Our company produce many different model welding machine , such as model 4000L , model 3000LC , model 4000C , model 2000C and other high quality model . If you have any other questions about our machine , please free to contact us .

And our company have other machine , such as automatic eyelet machine , hand eyelet machine , hot laminator , cold laminator machine , if you interesting our machine , please tell us , we will send details information to you