CRI-200 Common Rail Injector Tester Test Bench for Trucks' Common Rail injectors

  CRI-200 Common Rail Injector Tester Test Bench for Trucks' Common Rail injectors

CRI-200 test bench is the special device to test the performance of high-pressure common rail injector assembly, it adopts BOSCH original common rail pump to provide 0~2000 bar of rail pressure, it can test common rail injector of main producers(BOSCH,SIEMENS,DELPHI,DENSO).

 >>>CHARACTERISTIC  

1. Main motor drive adopts the frequency change to adjust the speed.

2. It is installed BOSCH original common rail pump to provide 0~2000 bar of rail pressure.

3. The drive signal can be adjusted.

4. Protection function of short-circuit.

5. The rail pressure can be tested in real time, it contains the high-pressure protection function.

6. Pulse and frequency of the injector drive signal can be adjusted.

7. The injection time can be setted.

8. dimension(MM):1200×800×1600;

9. weight:400KG.

 >>>FUNCTION  

1. Test the max. oil quantity of high-pressure common rail injector.

2. Test the cranking oil quantity of high-pressure common rail injector.

3. Test the backflow oil quantity of high-pressure common rail  injector.

4. Test the average oil quantity of high-pressure common rail injector.

5. Set the high-pressure common rail injector' injection state and oil quantity measurement.

>>>Technical Parameter

1. Test frequency of injector: 50-3000rpm;

2. Pulse width: 0.1-200ms;

3.Test injection time: 1-300s;

4.Rail pressure: 0-200mpa;

5.Graduate: 120ML;

6.Input power: AC 380V/50HZ/3Phase or 220V/60HZ/3Phase or on request;

7.Fuel temperatue: 40°C;

8.Overall dimension: 1200MM×800MM×1600MM;

9.Weight: 400KG.