China Supplier of Automatic Welder Machine

Specifications

1.China supplier of automatic welder machine
2.Digital control.Easy to operate automatic welder machine
3.Self-move,high speed

China Supplier of Automatic Welder Machine

 

Automatic Welder Machine Specification parameter:
1) Alternant electric voltage: 220V/50Hz;
2) Upper limit power: 2000W ;
3) Adjustable work temperature: 50-600°C;
4) Adjustable: self-move speed 0.8-15M/per minute;

5)Specification:   450*310*320mm

6) Whole weight: 10 kilogram;

7) Splicing width: 3-5cm.

 

When use Automatic Welder Machine :

1) Immobilise both ends of each disjunct poster surface with something such as stick belt or clamp, and leave about 30-40mm wide overlap edge on each disjunct poster surface edge;

 

2) Turn on the Automatic Welder Machine , prepare warm up about 2 minutes;

3) Bring up the machine, and place the roll at the end of the overlap edge;

4) According to quality and thickness of the poster surface material, consider the ground circumstance, adjust the proper temperature and speed, handle the Fuse machine Gun down and insert it between the two poster banner edges, then the machine start running, after go pass the overlap edge, the two disjunct banners will be well joined in one.

Automatic Welder Machine Application: laminate and bond up disjunct flat painting surface made of heat-melted material, such as outdoor advertising poster, PVC cloth & PE fabric Canvas, outdoor poster banner, plastic surface, Sailcloth...etc.

 

 

 

 

 

Automatic Welder Machine  advantage :

 

1.large power-2000w instead of 1200w ;

 

2.updating the cooling system , moving the cooling system to back , when the machine is with high temperature , the cooling system can do the cooling well , even will not effect on the fan ;

 

3.the size of nozzle is twice of the former one , so it can do the heating and cooling better ;

 

4.updating the noise buring the working , more environmentally