Yiloong update ball bearing airflow control Fogger V6 FOGGER 6 like kayfun v4

Specifications

fogger 6.0 :
1.22mm diameter
fill design
3.dual 1,1.5 and 2mm air holes
4.4 rebuild posts

Yiloong update ball bearing airflow control Fogger V6 FOGGER 6 like kayfun v4

Skype: loongtotemsales01

 

 

 

 

 

 

 

Yiloong Fogger V6 Specifications:

*Stainless steel 304
*22mm diameter
*Top fill design
*Fully pyrex glass tube
*4 posts for coil rebuild
*Ball bearing air flow control
*Dual 1mm,1.5mm and 2mm size air holes
*Bigger chimney and lower base

 

*Copper contact pin

 

 

 

Yiloong Fogger V6 Discriptions:

 

 

 

          Fogger series are our Yiloong own designed and manufactured as well as patent products. Here comes the 6th version---FOGGER V6.

 

 

 

         1.It features several main big differences compared to the earlier versions, it’s worthy of the name “RTA”. From the appearance, it’s fully assembled with  pyrex glass tank ,a big change from the fogger v6. The top cap etched “fogger” is removed. Looks sexy as hell for an atomizer.

2.The next big thing is about the air flow control. This time, various sizes of air holes to meet different vapers’ preference such as single coil rebuild, cloud chasing and sub ohm vaping. Fogger v6 can be accessed to dual 1mm,1.5mm and 2mm(2mm,3mm and 4mm in total) air holes adjustable with ball bearing air flow control function. With just a slight twist of the air flow control ring, all the air hole sizes are in right position. Now you don’t have to drill the holes by yourself or take off the air flow control ring.

       3.Moving on to the coil rebuild. Fogger v5 is with 3 center holed posts for coil rebuild. While for fogger v6, 4 center holed posts it’s mounted on the deck,super easy to rebuild within minutes.

    4.As fogger v6 mounted with 4 posts on the deck, the chimney is enlarged a little to cover the whole deck. Much room left so it wont touch the edge of the chimney as a risk of causing a shock or short.  Also, the base is lowered a little, so the general capacity of fogger v6 stays the same as fogger v5.

5.Filling is from the topwith a thick high quality oring this time in case of leaking issue appeared. You can lay it upside down with the sealed.

        6. Assembled with a glass drip tip, looks decent and aligned with the pyrex glass tube. Perfect .