Polyester Melt Filtration Using Stainless Steel Filter Element

Specifications

Stainless steel polyester melt filter element

Overcome the temperature and compatibility limitations of fabric or synthetic

fiber cartridges by replacing them with these stainless steel wire cloth elements.

They are good up to 500°F instead of the usual 250°F and they are unaffected

by most caustic fluids. Made entirely of 304 or 316 stainless steel, they are cleanable

and reusable, and can withstand differential pressures up to 60 psi. You can choose

particle retention ratings as fine as 5 microns. Element surfaces can be plain cylindrical,

or pleated to increase surface area. Pleated units rated 100 microns or finer have an

underlying support layer of coarser mesh to prevent pleat collapse. Fabrication is by

welding and crimping. Epoxy bonding can also be provided.

Specification

1) Material: Main filter media of filter cartridge are stainless steel sintered fiber web

and stainless steel weaving wire mesh. 
2) Filter rating: Filter rating range from 0.5 to 500 microns are availlable.
3) The sizes is available at customer's requirement. 
4) Operating medium: High molecular polymer, drug, hydraulic oil, water treatment,

hot gas, food and beverage etc    

Features

Good strength, fastness, easy cleaning, high temperature resistance. 
High porosity, large filter area and good dirt holding capacity
Can be used repeatly after chemical cleaning
Also have air filter, hydraulic filter, filter element ect