Contact Platform Support
Help CenterHot Sale Stainless Steel Suction Oil Filter Elements
Related Products
-
WU-63x80 Suction Oil Filter ElementsUS$ 15 - 100MOQ: 5 Pieces -
WU-800 G-J Suction Oil Filter ElementsUS$ 15 - 100MOQ: 5 Pieces
-
WU-16 X -J Suction Oil FilterUS$ 15 - 100MOQ: 5 Pieces
-
Custom Hydraulic High Pressure Fiter ElementsUS$ 20 - 150MOQ: 5 Pieces
-
Factory Supply Coolant Filter ElementUS$ 62 - 70MOQ: 5 Pieces
Specifications
1.suction oil filter element2.installation into suction line
3.Filtration ratings of 74 or 125 microns
4.ISO Test
Stainless steel suction oil filter element
Inside tank suction filter element are designed for installation into suction
lines of pumps. Extra caution should be taken to ensure that the suction
elements are always mounted below the minimum oil level of the reservoir.
Features:
Standard models have nominal filtration ratings of 74 or 125 microns.The
suction strainer elements can also be supplied with a bypass valve to reduce
high pressure drops caused by contaminated elements or high viscosity fluids
during cold starting. The bypass valve opens at 3 psi. for best results, suction
strainer elements should be sized for clean element pressure drops of no higher
than 0.5 to 0.7 psi. HYDAC suction Strainer Elements are manufactured using
stainless steel wire screen media.
Attention:
Suction strainer elements are only intended to protect hydraulic pumps against
catastrophic failure caused by coarse contaminants. Suction strainer elements
should be inspected and cleaned regularly. Suction strainer elements should not
be used as the only filtration elements in a hydraulic system. Pressure filters and
return line filters, with reasonable dirt holding capacity, must be installed to provide
protection against component damage caused by fine contaminants.
Hydraulic Data
Pressure Drop vs. Flow: Pressure drop will be < 2 psi when strainers are used
within the recomended flow range, and with a standard hydraulic fluid with a
viscosity of 141 SSU and specific gravity of 0.86.
Send Inquiry to This Supplier
You May Also Like
-
Stainless Steel Filter Cylinder, 316L, 50 Micron, 0.5 Bar, 100% TIG Welded, for Oil & GasNegotiableMOQ: 1 Piece
-
Filter MeshNegotiableMOQ: 2000 Pieces
-
Filter Mesh for Solid Al2O3 With EyeletNegotiableMOQ: 1
-
Self-Cleaning "Sandwich" Screens of SeparatorUS$ 665 - 800MOQ: 100 Pieces
-
Universal Mesh Reusable Coffee Filter Basket StyleUS$ 0.1 - 0.4MOQ: 2000 Pieces
-
High Quality Hot Sale Cooper Wire MeshUS$ 1 - 300MOQ: 2 Square Meters
-
Biological Filter MatNegotiableMOQ: 1 Piece
-
Disc Filter for IrrigationUS$ 1.5 - 10MOQ: 1000 Pieces
-
Strainer ScreenUS$ 0.25 - 0.5MOQ: 10000 Pieces
-
Liu Tech Air Compressor Air Oil SeparatorUS$ 15 - 150MOQ: 2 Pieces
