Home > Products > Light Fixings Anchors > Gravity Toggle/Spring Toggle With Machine Screw
Gravity Toggle/Spring Toggle With Machine Screw
- 100 Ton / Tons per Month
- SHANGHAI/NINGBO
- T/T
- Alkali-resistant concrete fiber glass mesh for building
- 2015 plastic fiber glass mesh fabric for hot sale
- Carbon fiber reinforcement mesh roll for indusrial buildings
- Reinforcement fiberglass mesh/carbon fiber mesh/concrete fiber mesh
- Alkali resistant fiberglass mesh net for external wall manufacture
- High quality fiber mesh/fiberglass mesh fabric/faber glass mesh net
Product Details
Place of Origin: | Jiangsu, China | Brand Name: | RLB | Model Number: | Spring Toggle |
Type: | Anchor Bolt | Material: | Other, Steel, Carbom steel. Stainless steel | Diameter: | 4,5,6,8, 1/8-3/8Inch, 4-8mm |
Length: | 60-120 | Capacity: | 150kgs | Standard: | DIN |
Product Description
How to use:
- Drill the correct size hole to enable the wings of the toggle to pass through the material being fastened to. A sharp drill bit with minimum pressure will prevent damage at the break through point.
- Pass the screw through the fixture being fastened and re-assemble allowing the end of the screw to slightly pass through the yoke.
- Close the wings back along the length of the screw and check that there is sufficient length of screw to enable the wings to clear the thickness of material being fastened into.
- Install the fixture against the wall guiding the toggle through the hole and pressing home until it falls down into position or springs open into position. Check that the wings have opened/ fallen into place by pulling back on the fixture.
- Tighten the screw, at the same time, pulling back on the fixture to keep the toggle in contact with the reverse side of the work surface. Do not over tighten to avoid stripping of the threads in the yoke.
Size Drill Hole Pull out load kgs
1/8 or M3 3/8 -10mm 130
M4 12mm 150
3/16 1/2 200
M5 14.5mm 200
1/4, or M6 5/8-16mm 500
5/16 or M8 7/8 500
3/8, or M10 7/8 550
1/2, or M12 1-1/4 680
Contact Us
- Nantong Reliable Metal Products Co., Ltd.
- Contact nameJohnny Cheng
- Phone86-513-85406963
- AddressNo.398 Yonghe Road Nantong,Jiangsu
Brthroom Fixed Hardware | Fastener | Insulation Fixings | Light Fixings Anchors |
Metal Framing System | New Products | Rigging And Accessories | Wooden Connector Brackets |
- Wedge Anchors metal frame Anchors Sleeve Anchors S.S. Anchors ZP Anchors
- Sleeve anchors fasteners metal anchors
- Shear Studs,Weld Stud ,Welding Stud ISO13918 Shear studs china supplier
- 310S pins and washers ceramic fiber cuplock
- waved refractory anchor V anchor Y anchor with rubber cap
- 310S v anchors for firebrick special shape anchor customization
- Hot selling M6 M8 M10 M12 Grey Plastic Wall Anchor Wall Plug Screw Use For Wall
- window frame anchor
- Hot Sale FactoryOutlet Plastic Wall Anchor Expansion Tube M4
- High Quality Male Pipe Plug 1\" Diameter Concrete Pipe Expansion Plug
- Nail Screw And Expander Yellow Plastic Expansion Pipe
- JINGHONG Box packed Pipe Rubber Expansion \tThreaded
- JINGHONG Nylon Wall Plug Plastic Expansion Screws
- JINGHONG Butterfly Spring Toggle Fixing Expansion Tube Bolt
- High quality wholesale yellow plastic expansion tube and screw box
- Jinghong White Expansion Screw Plastic Expansion Pipe 100mm
- JINGHONG Plastic Nylon Threaded Screw Sleeve
- High quality new design free matching box set with 300PCS plastic expansion plugs
- High Quality JINGHONG Carbon Steel Yellow Expansion Sleeve Anchor Bolts
- High quality sleeve ground screw expansion M8 anchor bolt
- Sell 8.8 M8 expansion anchor bolts high quality screws
- Widely used inflation stainless steel wedge anchors factory direct sales
- China Factory Direct Selling Plastic Toggle Wing Gypsum Board Anchor
- High Tensile JINGHONG Wall Toggle Gypsum Board Anchor
Popular Searches
Recommended Products
- Stainless Steel 304 Single Pin Heavy Duty Tri Clamp sanitary clamp with wing nut
- Air Lamp Base Locker E27/E14/E40/B22
- High strength 8.8 grade 10.9 grade hot forged large internal hexagonal customized national standard non-standard screws
- TOREM Universal Rotating Ring Lifting Ring Rigging Lifting Point
- Lifting rotating lifting ring mold lifting ring industrial lifting point
- 0-0.5 Micron 30000 grit Diamond Powder lapidary powder, grinding powder
- Cross roller guide, anti-creep linear movement slide, high-precision bearing steel slide, for medical packaging other equipment
- Rotating lifting ring universal lifting ring sling mold lifting tool
- TOREM lifting eye rotating ring spreader
- Magnetic base of dial indicator (hydraulic type)
- Magnetic base of dial indicator
- Swivel Lifting Point Lifting and transporting tools
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Johnny Cheng
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-