common wire nails
- 150 Ton / Tons per Month
- shanghai/ningbo
- T/T
Product Details
Place of Origin: | Jiangsu, China | Brand Name: | RLB | Model Number: | Common Nails Iron Nails |
Type: | Concrete Nail | Material: | Other, Steel, Steel,SS Steel | Length: | 10-600 |
Head Diameter: | 2.5d | Shank Diameter: | 1.2~12 | Standard: | DIN |
Product Description
Concrete Nails
1. Size:1/2"-14"
2. Available: Bright, E.G, H.D.G etc
3. Packing 25kgs per carton or as your requirement
Specifications
- Material :Q195/Q235
- Surface Treatment: Bright, E.G, HDG, V.C, C.C, P.C and so on
- Head: Flat Head
- Shank: Smooth/Annular/Spiral Thread
- Point: Diamond Point
- Packing Details :1)20-25kgs/CTN, 2)50lb/CTN, 3)30lb/Bucket, 4)5kgs/Box, 4)1kg/Bag etc.
- Advantage Big real factory, we can satisfy you products with good quality, fast delivery and satisfied service.
The length
The diameter
The weight/ 1000nails
inch
mm
BWG
mm
kg
1/2
9.52
20
0.89
0.046
3/4
19.05
17
1.47
0.25
1
25.40
16
1.65
0.42
11/2
38.10
14
2.11
1.03
2
50.80
12
2.77
2.37
21/2
63.50
11
3.05
3.58
3
76.20
10
3.40
5.35
31/2
88.90
9
3.76
7.65
4
101.6
8
4.19
10.82
41/2
114.3
7
4.57
14.49
5
127.0
6
5.16
20.53
6
152.4
5
5.59
28.93
7
177.8
4
6.05
40.32
Nail Head:
Flat head - Most common nail head. Provides large surface area for greater holding power.
Large flat head - Larger than standard head,usually more than 3 to 3-1/2 times the shank
diameter. Provides greatest surface area for ultimate holding power. For applications such
as sheathing and insulation.
Checkered flat head - Helps to stop slippage of the hammer on the head with applications such as framing, where excessive hammering may take place.
Countersunk head - Conically shaped bearing surface, which compresses the surface of the
material under it as it is driven. Aids in concealment of the fastener head.
Deep countersunk head - Reduced holding power, but increased concealment of the fastener head. Using primarily on casing nails.
Brad head - Deep, circular, barrel-shaped head. Reduced holding power, but increased concealment of the fastener head. Used primarily with finish and trim work.
Duplex head - For temporary nailing jobs, such as scaffolding and concrete framing.
Cupped head - Concave or recessed top surface to accommodate material to aid with concealment. Used primarily with drywall fasteners.
Oval head - Used in certain geographic areas primarily with siding to avoid contact between
the hammer and the siding.
Nail Shank
Smooth - Most common for everyday projects, provides the least amount of holding power.
Barbed - Horizontal or herring-bone indentations in the shank. Relatively better hold than smooth shank, but far less than a comparable threaded nail.
Screw/spiral - Designed to drive into hard woods and dense materials. Nail actually turns when driven, much like wood screws. Very good holding power.
Ardox - Designed to drive into hard woods and dense materials. Square wire is twisted to form the spiral shank, which results in the threads reaching all the way to the head of the nail. In comparison, most nails are made from round steel wire and the spiral or ring shanks are actually cut into the wire.
Ring/annular thread - A series of closely spaced concentric rings around shank. Nail does not turn when driven; instead, the wood fibers are forced over the ring shoulders into their annular grooves like wedges. Gives greatest holding power in soft or medium woods.
Fluted - Vertical thread for driving into cinder block, mortar joints, or other relatively soft masonry to minimize cracking and provide high holding power.
Nail Finish:
Bright – Bright, uncoated steel finish intended for use,where corrosion resistance is not required.
Blued – Degreased and heat-cleaned to form thin blue oxide film required by lathers.
Cement coated – Resin coating shortterm holding power.
Vinyl coated – Eases nail driving and provides greater holding power.
Phosphate coated – Chemically treated with a gray ferric phosphate protective coating.Surface is also etched for greater holding power. Good base for paints and other finishes.
Electrogalvanized – Zinc coating applied to steel with an electrical charge. Offers limited resistance to rust.
Mechanically galvanized – Zinc coating applied by tumbling with powdered zinc and glass beads. Offers increased corrosion resistance, comparable to hot galvanized when equivalent amount of zinc is used.
Hot galvanized – Zinc coating applied by a heat treatment. Offers increased corrosion resistance.
Hot dipped galvanized – Zinc coating applied by dipping into molten zinc.
Gold ichromate – Gold-colored zinc dichromate applied over electrogalvanized surface for additional corrosion resistance. In addition, gold color provides a more aestheticly pleasing appearance.
Copper – For specialty applications when working with copper or where appearance is a factor (copper weathered by age and exposure to elements can provide desirable appearance).
Contact Us
- Nantong Reliable Metal Products Co., Ltd.
- Contact nameJohnny Cheng
- Phone86-513-85406963
- AddressNo.398 Yonghe Road Nantong,Jiangsu
Brthroom Fixed Hardware | Fastener | Insulation Fixings | Light Fixings Anchors |
Metal Framing System | New Products | Rigging And Accessories | Wooden Connector Brackets |
Popular Searches
Recommended Products
- Stainless Steel 304 Single Pin Heavy Duty Tri Clamp sanitary clamp with wing nut
- Air Lamp Base Locker E27/E14/E40/B22
- High strength 8.8 grade 10.9 grade hot forged large internal hexagonal customized national standard non-standard screws
- TOREM Universal Rotating Ring Lifting Ring Rigging Lifting Point
- Lifting rotating lifting ring mold lifting ring industrial lifting point
- 0-0.5 Micron 30000 grit Diamond Powder lapidary powder, grinding powder
- Cross roller guide, anti-creep linear movement slide, high-precision bearing steel slide, for medical packaging other equipment
- Rotating lifting ring universal lifting ring sling mold lifting tool
- TOREM lifting eye rotating ring spreader
- Magnetic base of dial indicator (hydraulic type)
- Magnetic base of dial indicator
- Swivel Lifting Point Lifting and transporting tools
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Johnny Cheng
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-