Smart Hotel Touch Screen Switch with DND and Clean

Specifications

1.LCD touch screen,toughened glass panel
2.Standard 86 type wall switch
3.Sensor touch control
4,OEM and ODM welcome

LED Touch Screen Electric Wall Switch

 

 

 

Touch switch informations:
1.Easy installation - standard 86 type wall switch appearance design,do not need to connect neutral,do not need to change any of lamps and lanterns,can be directly replaced the original wall switch;
2.Available lamps and lanterns - may meet fluorescent lamp,energy-saving lamps,incandescent lamp,downlights and so on;
3.Lightning protection design - with lightning protection function,safe and reliable;
4.Partition wall remote control - can be partition remote control(remote control of the sitting room lamps from bedroom);
5.Do not interfere each other - adopting digital decoding technology,without direction,will not mutual interference with neighbour's same model product;
6.Incoming power auto extinguish - power grid off and on again,switch automatically closed, avoiding waste electrical energy;
7.Two-way control -- can use the wall switch control, also can remote control,more convenient;
8.Master OFF/ON - remote controller can be set master OFF/ON button easily press a button to open or turn off all lamps;

 

 

Product specifications:
1.Size: 86*86 *39mm;
2.Color: gold, silver, pure white,bottom case is black;
3.Material: it adopts PC flame retardant plastic,nondeformable,invariant color, toughened glass panel and bottom case adopt ABS fire-resistant material,
4.Touch screen: the most advanced electronic touch technology, manual touch can be amounted to 40,0000 times above.

Product features:
1.Unique contact way of code,stronger anti-interference ability;
2.Wide voltage design,180-220V circumstance, it can work normally;
3.Manual part adopts traditional mechanical springboard switch control method, silver contacts, feel is good, long life;
4.Don't pick lamps,no need to add compensation capacitor to connect with fluorescent lamp and energy-saving lamps,without flashing phenomenon;
5.Ultra-low for power consumption design, Standby power consumption:less than 0.011W,annual power = (0.011W x 24 hours x 365 days)÷1 KWH = 0.096 KWH (10 years insufficient 1 KWH)

Technical parameters:
1.Maximum load current: 5A;
2.Longevity: 40,0000 times operation;
3.Working voltage: AC180-220V / 50HZ / 60HZ,
4.Working frequency: conventional preparation can manufacture 315MHZ 433MHZ;
5.Temperature environment: 0 ~ 80 degrees;Relative humidity 95%,
6.Working current: 220V 40 microamps current below, standby power consumption 0.0088W,
7.Remote distance: standard configuration empty distance 30 meters (can deserve to choose 50 meters or 100 meters above the remote control)
8.Maximum load resistance: the total power 500W,resistance load single way 500W.