Plastic Steel Biaxial Geogrid with CE certificate

Plastic Steel Biaxial Geogrid with CE certificate

Product Description

The plastic steel composite geogrid uses high tensile steel wire (or other fiber)specially handled and polyethylene (P.E) with other assistants. Then squeeze it out and make it become composite high-strength anti-pull belt and the surface has rough embossing then it is reinforcement earthwork belt.Warp knitting vertically and horizontally using this single belt and welding the joint using a special welding techology to molding is reinforcement geogrid.

New Feature

1. The intensity is high and the distort is small;

2. The wriggle is small;

3. Anti-corrosive,the life is long,the geogrid take the plastic material as a  protector, auxiliary  enables it by each kind of assistant to have the antiaging,the oxidation susceptibility again,but acidproof ,alkali,salt and so on adverse circumstance corrosion.Therefore ,the steel modles the earhwork gril to be possible to  meet each kind of permanent work100year above use need,and the perfor mance is superior,the size stability is good;

4. The construction is convenient ,the cycle is quickly short.the cost is low;the steel plastic complex  geogrid to lay down,joining ,the localization to be easy,to be smooth,avoids overlapping crossover,but reduced the project cycle effectively,saved the building cost of projects by 10%-50%.

Product Application

 The products are applied widely in railway,bridge,dock,retaining wall.dam to reinforce the soft soil's and to resist the road surface's crack.

Technical Parameter